A problem with the scanner bed

[Squeak22]

I'm having trouble with the scanner bed it won't move or the light turn on.

[MarcelusWallace]

Hi @TFPowick,

I can help you perform a hard reset and troubleshooting the scanner light issue.

Hard Reset

Turn the printer on.

With the printer turned on, disconnect the power cord from the rear of the unit.

Unplug the power cord from the wall outlet.

Wait at least 15 seconds.

Plug the power cord back into the wall outlet.

Reconnect the power cord to the rear of the unit.

If the printer does not turn on by itself, press the Power button to turn it on. 

Also, do you have the printer connected directly to a wall outlet or is it in a surge protector or power bar? Even if you have been using a surge protector/power bar all this time and you feel it is not the cause, please connect it to a wall outlet just so we can eliminate the power source as the root cause.  HP LaserJet 1018, 1020, and 1022 Series Printers - Issues when Connected to an Uninterruptible Power...

In this document you will see, ISSUE: Problems or issues may arise when an HP LaserJet series printer is connected to an uninterruptible power supply (UPS), a power strip, or a surge protector.

^ This is not limited to Laserjet printers.

If the issue persists, call us again. If you are in Canada or US call 800 474 6836, or you can  Contact HP Worldwide.

If this helps show appreciation for my reply by hitting the “thumbs up” below, or click the "Accept as Solution" button if I have helped you reach a solution.

I hope this helps, and have a great day.