cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
wweng
New member
1 0 0 0
Message 1 of 2
426
Flag Post

DJ T730 not printing bottom border in AutoCad?

HP Recommended
T730
Microsoft Windows 10 (32-bit)

I have 5 drawings in the same DWG. Two drawings will print great (all drawings 24x36) at 34"x22.5 border, X=.5, Y=-.5. Then the other 3 in the same DWG will NOT print the bottom border?? I have tried copying the border that prints but still will not get the bottom line???

Please help.

using AutoCad Civil 3D

0 Kudos
1 REPLY 1
rasheddul
Level 7
634 618 35 81
Message 2 of 2
Flag Post
HP Recommended

Hi,

 

Thanks for contacting with HP Support Forum.

 

Please note the margine level:

 

Margins (top x bottom x left x right)

 

Roll: 5 x 5 x 5 x 5 mm (0.2 x 0.2 x 0.2 x 0.2 in)
Sheet: 5 x 5 x 5 x 5 mm (0.2 x 0.2 x 0.2 x 0.2 in)

 

Please check the below link:

 

http://h30434.www3.hp.com/t5/DesignJet-Large-Format-Printers-and-Digital-Press/Custom-Print-Sizes-No...

 

goto printer properties and Features and mark on Rotate by 90 degree.

 

Lets check to print.

 

 

I hope that answers will support to concern adequately. Let me know! Good luck 


Please click "Accepted as Solution" on the post that solves your issue to help others find the solution. To show appreciation for my help, please click the "Thumbs Up Icon" below!

 

Thanks,
Rashed

Regards/Rashed
https://www.linkedin.com/in/rasheddul
0 Kudos
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation