cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
FCOJRM
New member
1 0 0 0
Message 1 of 2
456
Flag Post

DRIVERS

HP Recommended
HP DESIGNJET 450C
Microsoft Windows 8.1 (64-bit)

My computer has Windows 8.1 64bit with Autocad 2015 and I have an HP Designjet 450C plotter which I do not find the driver for my operating system. I need help with this.

0 Kudos
1 REPLY 1
rasheddul
Level 7
634 618 35 81
Message 2 of 2
Flag Post
HP Recommended
Hi, Thanks for contacting with HP support forum.

Most of it cant possible to connect the old hardware with new software data process. Most of time manufecturer are update their old product update software upto fix time or duration.

You may try to download the below software from the below link:

http://www.solvusoft.com/en/update/drivers/printer/hp-hewlett-packard/designjet/400/450c/

https://support.hp.com/sg-en/drivers/selfservice/hp-designjet-400-printer-series/25253/model/24561

Try downloading the universal hpgl2 driver and then on the computer use the add printer, next, use the create port and in the drop down choose standard tcp/ip and then next, enter the ip address of the printer (has to be in the same frame as the computer) and when you get to the makers page choose have disk and navigate to where you downloaded and ran the program for the universal driver and finish up and it should work.

Regards
Rashed
Regards/Rashed
https://www.linkedin.com/in/rasheddul
0 Kudos
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation