Note on archived topics.
10-05-2013 04:40 AM
I'm a happy user of Designjet 111 with a one annoying problem. It's possible to live with but it's really frustrating.
I mostly print from Bentley Power Draft (technical drawings with 5mm borders). Everything is ok but printer make an additional 5mm margin on a right side of a drawing, than it print vertical line (my outside drawing border), 5mm break and than it starts printing final inside drawing.
I know that in specification is written about the margins but... I also use Designjet T650 or T1100 and in their drivers there is an option "Clip content by margins" and by using this a have a final drawing as I want to.
Is it possible to make the same with a Designjet 111?
(I attach a photo of my drawing margins)
10-11-2013 03:02 AM
I've checked all You were writing about. There were no driver updates till 2010 and no firmware from the beggining.
In other programs it works the same. I thimnk i's HP Driver problem becouse the margin occurs only on right side (this side which firstly leave plotter).
I found workaround but it's very uncomfortlable. The sollution with "Clip drawing by margins" as it is in HP T1100 or HP T650 would be the best.