Everytime I try to connect to a network, A printer error comes out (Blue Screen displaying B8118F32). It then tells me to turn off the printer and turn it ot again. I've tried everything: Factory Reset, Wireless Reset, Unplug it and plug it. The printer does not connect to the network and pops the same error everytime. Any help will be appreciated.
Thank you for showing your interest in HP Support Forums. It is a great place to find the help you need, from other users, HP experts, and other support personnel. For you to have the best experience on the HP forum, you could also visit our HP Forums Guide for the First Time Here? Learn How to Post and More.
As I understand you are getting an error message on your HP printer. Don't worry as I have a few steps to help you get through this concern,
To provide you with an accurate solution, I'll need a few more details:
Have you made any changes on the printer before the issue started?
Have you tried to perform a Hard reset on the printer?
In the meantime, let's start off by performing a Hard reset on the printer and make sure that the printer is connected directly to the wall outlet and not to the surge protector.
Remove all the ink cartridges and then try to perform a hard reset on the printer.
With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.
Remove USB cable, if present.
Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.
Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord and then plug back the power cord to the printer.
Turn on the printer and wait till warm-up period finishes and the printer is idle.
Now insert the ink cartridges and then try to print a test page and check if it works.