Ask questions. Help others.
The HP Community is here for you.
Post new question
Question
Reply
 
Note on archived topics.
This topic has been archived. Information and links in this thread may no longer be available or relevant.
If you have a question create a new topic by clicking here, or click on "Post new question" above and select the appropriate board.
Student
Posts: 1
Member Since: ‎08-21-2009
Message 1 of 2 (1,280 Views)

HP Color Laserjet 2600n don't print using a old software.

[ Edited ]
Hello !

I'm using a software that was made using "Borland C++ Builder 5.0".
This software works well in many HP Printers, but don't print in the "HP Color Laserjet 2600n", when I click "print" the software crashs (lock).

1 - I tried the command below, but don't works:
net use LPT1: \\127.0.0.1\SharedPrinterName /PERSISTENT:YES

2 - I enabled the USB Legacy Support in the BIOS, but didn't work in this case.

3 - Tried to find for a postscript driver, but I can't find it.

If I choose a "PDF Printer" and then I can print using Acrobat Reader, but this solutions adds a big step on the process.

I'm using Windows XP "fully" updated.


Is there a postscript driver for this printer?

Please, let's discuss about a possible solution for this issue.

 

 
Thanks in advance.
Andre Abrantes.
Message Edited by AndreAbrantes on 08-21-2009 07:34 PM
0
Highlighted
Honor Student
Posts: 2
Member Since: ‎05-23-2011
Message 2 of 2 (650 Views)

Re: HP Color Laserjet 2600n don't print using a old software.

Sorry. There is no PCL or postscript driver for this printer. HP does not plan on doing one either. I had the same issue trying to print from a 32 bit application that needs the PCL 5e or 6 driver and there are none. Time to upgrade the software.

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation