Ask questions. Help others.
The HP Community is here for you.
Post new question
Note on archived topics.
This topic has been archived. Information and links in this thread may no longer be available or relevant.
If you have a question create a new topic by clicking here, or click on "Post new question" above and select the appropriate board.
Posts: 1
Member Since: ‎02-16-2014
Message 1 of 2 (309 Views)

HP DesignJet 90: Prints from the tray on A4, but ejecting A3

Furthermore, it's impossible to perform the calibration procedure of paper feeding. After the pattern is printed, the printer pulls paper from the bypass tray, the carriage passes to the left and to the right, and the printer ejects the sheet. During printing, this only happens with A3, A4 at the same printed normally.

0 Kudos
PhD Student
Posts: 839
Member Since: ‎09-19-2011
Message 2 of 2 (287 Views)

Re: HP DesignJet 90: Prints from the tray on A4, but ejecting A3

I understand that the printer is unable to load A3 size media from both the cassette tray and manual feed option.  This could generally happen due to skew noticed by printer during media load procedure.

Please mark the post that solves your problem as Accepted Solution
Click the 'Kudos Thumbs Up' if this was helpful. Thank You!

(Although I am an HP employee, I am speaking for myself and not for HP)
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation