The HP Community is here for you.
05-22-2011 08:55 AM
I've had the same problems. Finally, after going into [My Computer} and accessing [Manage} and the Printer tab, I cleared the spooler and got it to print out. However, this is unacceptable on any level for any printer. Printers are supposed to PRINT, without a lot of backflips to get them to do it. I once said that my old Dell/Lexmark was junk, but it DID print on a regular basis, without having to get too technical.
Note to HP management ... even products sold as 'loss leaders' are supposed to WORK PROPERLY.
If I can solve the problem of this printer, fine, we'll keep it until it's obsolete. If I have to reinstall it again, that's the end of it.
06-11-2011 04:46 AM
Hi! I also have problem with my HP deskjet D1660 printer. The button light always links. I restarted it for how many times and I also tried to hold it for 5-10 seconds. still it blinking continues. I even remove it from the plug etc. What shall I do? thank you
04-13-2012 02:35 AM
I was about to throw the printer out because it would not release from the queue and print the documents. it only did it after i had switched the PC off & then back on again - then it printed.
Disenabled bi-directional and ok now!
06-08-2012 01:40 AM
The model number HP Deskjet D1660.
You may refer to the below links and use the troubleshooters. Check if it lists and helps resolve any issues: Open the Printer troubleshooter:
You may check if you have the latest drivers installed for the device. You may refer to the below link for getting the latest drivers and check.
HP Deskjet D1660 Driver
09-19-2012 12:21 PM
I had same problems described in this forum. My solution involded two different posts that I summarize below:
1. -I just restarted my computer, (plugging in the printer's USB cord in first), and the printer installed itself without the need for the CD. and now works!
2.- On Windows 7. Go to "Devices and Printers" Right click on HP 1600 (or 1660) click on Printer Properties and go to Ports tab once in there at the bottome you must uncheck "Enable Biderectional Support". No checks remember that.
Voila! This thing now works. I guess HP wanted to make me sweat the $30 I paid for it.
08-13-2014 10:19 PM
"Note to HP management: even loss leaders should work properly."
I almost wonder if HP is deliberately ignoring this problem, to get back at us for buying something they lost money on.
I think it's a software problem. I had difficulty installing mine on an old Dell Laptop running Windows XP. Finally I found a "fix" that involved editing the Windows registry to replace a registry key that apparently gets discarded when the HP installation process does the "cleaning up old drivers" part. It worked! That was the first time I ever had the nerve to try editing the registry, and it was only because the laptop in question was a rather beat-up fossil that I wouldn't have minded junking.
But now I've switched to a newer, nicer laptop that runs Windows 7, and that I won't take that kind of chance with.
The next time I buy a printer, I expect I'll look for a brand other than HP.
03-24-2015 10:44 AM
Thank you eriehml
Unchecking bidirectional compatibility in the ports tab of the printer properties solved the problem !!
I was becoming crazy, I tested the printer on Linux ¡¡ and it worked perfectly !! but it didn't on windows and i had to make it work on windows for my job. Thats when i knew the problem wasn't the printer, but the software.
On windows my printer only printed test page (it did it flawlessly) but it stopped printing other jobs in the middle. I had tested everything, reinstall different version drivers, using intermediary printing software didn't work either. I was thinking some crazy solution like porting linux drivers to windows somehow but your solution worked thank you very much, it put a great headache to an end.