Ask questions. Help others.
The HP Community is here for you.
Post new question
Note on archived topics.
This topic has been archived. Information and links in this thread may no longer be available or relevant.
If you have a question create a new topic by clicking here, or click on "Post new question" above and select the appropriate board.
Posts: 1
Member Since: ‎01-06-2013
Message 1 of 2 (422 Views)

HP Officejet Pro 8600 network problems

HP Officejet Pro 8600 can't be accessed through router.  ROKU changed some settings in router.  What settings are a must?

0 Kudos
Master's Graduate
Posts: 406
Member Since: ‎04-22-2010
Message 2 of 2 (408 Views)

Re: HP Officejet Pro 8600 network problems

There are so many different settings.  Do you know which ones the ROKU changed?

Do other wireless devices still connect to the router OK?


In most cases the printer should adapt to changes unless they are the network name and password.  If you haven't tried ityet turn the printer off, let sit a minute then turn it back on again.  That will force the printer to negotiate with the router to get any settings changes.  If the blue LED on the printer does come back on lit (no blink) then the printer is communicating with the wireless network properly again and your problem might be with a IP address change. 

Let me know the status of the blue LED on the printer after the power cycle.

Please mark the post that solves your problem as "Accepted Solution"
Sometimes it takes several posts back and forth to get to a solution - please be patient.
I am employed by HP
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation