The HP Community is here for you.
01-28-2013 09:28 AM
It seems as though the light source to the front of my printer has stopped working. The touchscreen is therefore blank and there is no light showing around the power button or to indicate that wi-fi is on. There is still power to the printer and it still works if I send a print. However without the touchscreen I can't scan, photocopy or use any of the other functions.
Has anyone come across this problem before? Is there a part that can be replaced to get the printer fully-functioning again?
It seems such a waste to have to replace the whole printer but it's of limited use in its current state.
Thanks in advance for your help.
Btw it's less than 2y old but, of course, outside the warranty period!
01-29-2013 10:36 AM - last edited on 02-22-2017 12:55 PM by OscarFuentes
I am including a document below that will assist you with your issue with the screen. If the steps in the document don’t resolve your issue then you will have to consider replacement options.
Let me know how it goes.
01-29-2013 02:53 PM
Thanks for responding.
It seems either I'm not seeing something relevant in this link or maybe you've misunderstood the nature of the problem.
There doesn't seem to be an issue with the power given that the printer still prints. However the touchscreen isn't working (i.e. it's blank and in addition there is no light around the power button and no light showing for the wi-fi signal), so I can't use the other functions (copy, scan etc). That's why I thought maybe there is a light source, that powers the screen and the lights on the front of printer, that has expired. And if so, I'm wondering if it can be replaced?
Any other ideas?
01-30-2013 10:39 AM
I understand your issue the document above addressed a possible reason for your screen not working. A couple of things I wanted to make sure do you have the printer plugged directly into a wall outlet? The last thing I would do is try a hard reset on the printer. The steps for a hard reset are below. Also, the touchscreen is not a replaceable part.
1. With the printer powered on unplug the printer from wall outlet.
2. Wait 30 seconds.
3. Plug power cord back into wall outlet.
02-01-2013 06:02 AM
The printer was plugged in through a power bar so I've tried following your steps and plugging it in directly at the wall. Sadly makes no difference so I guess we have to buy a new printer.
We've been pretty pleased with the printer when it was working but are very unhappy that it's failed after less than 2 years. What a waste of time, money and resources!
We'll be taking a close look at other manufacturers and their reliability track record before making another purchase.
Thanks for your help anyway.
02-01-2013 10:22 AM
If you consider Hp try contacting Hp Support at this number 1-800-474-6836 and ask about the upgrade program. The upgrade program allows you to get a printer at a discounted price since you already have an Hp printer.
02-05-2013 09:19 AM
I am not sure if it works the same in the UK. I would give them a call an see if its available.
Let me know how it goes.