• ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
The HP Community is where owners of HP products, like you, volunteer to help each other find solutions.
Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
HP Recommended
Linux

I could print from it until a few days ago when it printed a faint sheet so I thought the ink had been exhausted.

But I notice of of the lights idicating low ink was on.

I bought a new set of ink catridges ( Colored and Black 650 ) yet the printer is not printing and the ink indicator is still on.

 

I need help because it is so frustrating

 

1 REPLY 1
HP Recommended

Hi @Debrocks,

Welcome to HP Forums, this is a great place to get support, find answers and tips.


Thank you for posting your query, I'll be more than glad to help you.

I understand that you are unable to print from your HP Deskjet Ink Advantage 1515 All-in-One Printer even after replacing the cartridges.

 

This issue could occur if the cartridges are not installed or aligned properly.

 

Let's go through a few steps to troubleshoot this issue.

 

And here's the step by step guide for you in the link: Print Quality Issues

 

You may also try performing a power reset on the unit by following the steps listed below:

 

1.Turn the printer on, if it is not already on.
2.Wait until the printer is idle and silent before you continue.
3.With the printer turned on, disconnect the power cord from the rear of the printer.
4.Unplug the power cord from the wall outlet.
5.Wait at least 60 seconds.
6.Plug the power cord back into the wall outlet.
NOTE: HP recommends connecting the printer power cord directly to the wall outlet.
7.Reconnect the power cord to the rear of the printer.
8.Turn on the printer, if it does not automatically turn on. The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.
9.Wait until the warm-up period finishes and your printer is idle and silent before you proceed.

 

Let me know how this works.
 

You have a good day ahead.
 

Rainbow23 - HP Support.
Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.