cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
Astero_Profil
New member
1 0 0 0
Message 1 of 2
173
Flag Post

Inconsistent Print from HP Designjet L25500

HP Recommended
HP Designjet L25500

 

Hello! Desperate for help. I am counting on this printer for my customers but this has been a problem for days now. The printing starts okay for the first 10 centimeter and then it fades out just like the one in the image below.

I have already recalibrated the machine, cleaned printheads, aligned printheads manually, the cleaning cartridge is newly replaced and there are no maintenance needed according to the front panel. What else do I do?

 

18406289_10208423402693673_1087024883_o.jpg

 

0 Kudos
1 REPLY 1
Roy_Kuzmich
Level 6
217 191 21 32
Message 2 of 2
Flag Post
HP Recommended

 

Check the Primer assembly for any missing rubber nibs (That crane looking device above the carriage on the right side)

If it is missing any nibs, you will have to replace that and calibrate it.

 

Try doing a Force Drop Detector (you will have to find it in the service menu)

then recalibrate the Drop Detector

 

Have you actually repalced any Printheads?

Most quality issues can be resolved with replacement of one, some or all printheads.

 

Good Luck,

Roy K

 

You may also want to post this in the Latex Knowledge Centre Forum to get more looks from Latex experts.

0 Kudos
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation