Ask questions. Help others.
The HP Community is here for you.
Post new question
Question
Reply
 
Note on archived topics.
This topic has been archived. Information and links in this thread may no longer be available or relevant.
If you have a question create a new topic by clicking here, or click on "Post new question" above and select the appropriate board.
Honor Student
Posts: 2
Member Since: ‎11-03-2008
Message 1 of 3 (623 Views)

Lan FAx whit RTE Fax parameters

 

hello,

 

what are the parameters to declare on the RTE Fax server for the HP DSS server work.

 

 

 

c00433124.pdf - Adobe Reader.jpg

 

dss.jpg

0 Kudos
Intern
Posts: 24
Member Since: ‎05-06-2013
Message 2 of 3 (598 Views)

Re: Lan FAx whit RTE Fax parameters

Joaquin -

 

Generally you need to do two things - 

1) Configure the fax sever to work with DSS

     - You need to configure a "watched" folder for the RTE fax server to look for jobs coming from DSS

     - There should be a configuration setting in RTE fax to set this up, if not, check their documentation

 

2) Configure the DSS software via the Configuration Utility to enable Lan Fax

     - Select the RTEFAX setting

     - Browse to the "watched" folder setup by RTE fax

     - Select if you want DSS to send the job notification (or let the fax server do it)

     - There are a few other settings in the DSS Cong Util, but keep them as is.

 

Give this a try.

Highlighted
Honor Student
Posts: 2
Member Since: ‎11-03-2008
Message 3 of 3 (593 Views)

Re: Lan FAx whit RTE Fax parameters

Hello and thank you for your help.

Under RTEFax it is specified an entry for faxing folder.

Another folder for confirmation and a last folder for errors.

On DSS4  it is possible to setup a single folder only.

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation