cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
OGUADINMA
New member
1 0 0 0
Message 1 of 2
90
Flag Post

MY PRINTER WHEN PUT THE "HP" REMAINS TRANSFIX ON THE LED SCREEN. DOES NOT UNTIL ONE PULLS THE CABL

HP Recommended
HP3050 ALL IN ONE WIRELESS
Microsoft Windows 7 (32-bit)

apart from the hp logo appearing on the LED screen, there has been subsequent error messages OXBOO29AO2 APPEARING ON THE LED SCREEN.  in this state can only scan but does print.  how do i solve this problem?

0 Kudos
1 REPLY 1
Jeet_singh
Retired
Retired
21,068 21,032 1,398 2,342
Message 2 of 2
Flag Post
HP Recommended

Hi @OGUADINMA,

 

Thank you for showing your interest in HP Support Forums. It is a great place to find the help you need, from other users, HP experts, and other support personnel. For you to have the best experience on the HP forum, you could also visit our HP Forums Guide for the First Time Here? Learn How to Post and More.

 

I see from the post that you are getting a '0x' error message on your HP DeskJet printer. Don't worry as I have a few steps to help you get through this concern,

 

To provide you with an accurate solution, I'll need a few more details:

Did you happen to make any changes on the printer before the issue started?

Are you using genuine ink cartridges or refilled ink cartridges?

Have you tried to perform a Hard reset on the printer?

 

In the meantime, let's start off by performing a Hard reset on the printer and make sure that the printer is connected directly to the wall outlet and not to the surge protector.

 

Remove all the ink cartridges and then try to perform a hard reset on the printer.

With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.

Remove USB cable, if present.

Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.

Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord and then plug back the power cord to the printer.

Turn on the printer and wait till warm-up period finishes and the printer is idle.

Now insert the ink cartridges and then try to print a test page and check if it works.

 

For more details, please follow this link.

 

If the issue persists, I would recommend this could be a hardware failure with the printer. I would suggest you contact our HP phone support for available service options. If your product is out of warranty please choose paid options to get the tech support number.

 

Please use the following link to create yourself a case number, then call and it may help speed up the call process:

Step 1. Open link: www.hp.com/contacthp/

Step 2. Enter Product number or select to auto detect

Step 3. Scroll down to "Still need help? Complete the form to select your contact options"

Step 4. Scroll down and click: HP contact options - click on Get phone numberCase number and phone number appear.

They will be happy to assist you immediately.

Keep me posted for any other assistance,

 

Regards,

Jeet_Singh
I am an HP Employee

0 Kudos
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation