The HP Community is here for you.
01-15-2014 06:23 PM
Online support and docs do NOT specify which fonts are available under PCL5 on current printers, and the PCL compatibiilty guide has not been updated in many years. This is specifically for printers that claim PCL5 compatibility, like the P2035, P3015, Pro 300 and 400 series, Pro x576 and x476dn, etc.
Some printers claim 40+ fonts but not until you buy them can you find out that only a few work under PCL5, the rest are PCL6 only.
We need to replace older LaserJet printers (4000, 5000, 8000 series, 2430s, etc) that HAD PCL5 fonts with a wide selection of fonts, proportional scalable, fixed pitch, etc, and also could reliably download bitmap fonts that applications used for logos. Many of the low end printers (that say they support PCL5) also have problems with a downloaded bitmap font, but again we cannot get this information from online resources
This is NOT for windows/mac printing, it is for OpenVMS and Unix systems sending prebuilt PCL5 and text to the printers. There are no PCL6 drivers available for these systems.
Can you tell me how to get this information short of buying and trying each model of printer?
If you can, thank you, because this has been a problem for years now.
01-16-2014 07:56 AM
I will look to see if i can find someone that can help you.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution
I am an HP employee!
01-16-2014 08:21 AM
Thanks; I was hoping I got in under the wire for expert assistance; normal support channels and presales have not been helpful.
01-16-2014 11:05 AM
Our *Pro line is different than our Enterprise line of products..
Here is a long link that describes how to show the font list on a LJ 1015 (google "pcl5 fontlist page hp laserjet 1015 printer it resource center")
Supported PCL Fonts
- Open the HP LaserJet Toolbox.
- Click the Device Settings button.
- Click the Information link.
- Click the Print Info Pages link.
- Click the Print button next to the PCL Font List option.
Also the newer enterprise models support 4 UFST font datasets. This allows for world wide printing of Chinese, Japanese, and Korean glyphs.
More details on a specific case that isn't working as expected could help.
An HP Employee
01-16-2014 01:05 PM
thanks but that doesn't help. We need to know _before_ we purchase a printer for one of our sites that it will have the capabilities we need. That information used to be provided by the website, or by downloadable docs available prior to sale. If you compare a manual for a LaserJet 5 or 4000 to the ones available for current printers you will see how much info used to be provided, that is no longer available.
I don't _have_ these printers to run a font list on. I need to know if they do before I tell a customer they can safely buy one. I have, out of desperation in the past, posted public pleas for help from anyone who had access to a particulat printer model to send me a PCL5 font list from it because there seems to be no way to get this info from HP anymore. Thats how for a while we knew we could purchase LaserJet 2430 printers as usable replacements for sites needing smaller printers (we took a risk on the soft font downloads but they worked on that model).
Every time HP comes out with new printers in the small-midsize range, we run into the same problem; customer asks if they can purchase one to replace an older printer and we have no way to tell if it will serve or not because we can't get details on the completeness of PCL5 support, fonts, and capabilities unless we can find someone who has already purchased one and is willing to run the font list, and/or run a bitmap soft font load and test.
01-18-2014 08:57 AM
If it's any help, attached is a scan of the PCL font list produced by my LaserJet Pro 400 Colour MFP M475dn.
01-20-2014 04:15 PM
Thank you! With one post and attachment you've provided more directly useful info than I've managed to get from HP presales support over the past several years!
This particular printer is now an option. We still need to confirm its ability to handle a downloadable bitmap font but give the font list, it looks like its one of the "real" PCL5 printers so should be ok.
01-21-2014 06:09 AM
I'm fairly sure that the LJ M475dn supports downloadable PCL5 bitmap soft fonts, of formats 0 (bitmap (deprecated)) and 20 (resolution-specified bitmap), and also the scalable format 15 (TrueType) and 16 (Universal) ones; not sure about the old format 10 and 11 (Intellifont scalable) types.
I have in the back of my mind that there is a slight problem with downloaded soft fonts on this (and simlar?) models: downloaded fonts, even if set as 'permanent', do not persist once the printer enters 'sleep' mode.
If i get time in the next few days, I'll try to confirm the above.
01-21-2014 03:56 PM
From the Firmware team on the Pro LJ series:
The HP 85 Font set has been supported for the last 2 years and will be supported for the forseeable future. (see attached printed font list above)
The Pro Line supports downloadable formats 0, 10, 11,20,15 and 16 for the past 2 years and is the plan for the future.
an HP Employee.
01-22-2014 10:09 AM
Attached are 5 small print jobs in .prn files (each disguised with an additional .txt extension in order to allow them to be uploaded in this forum):
- bmp_fixp_fmt0.prn downloads a fixed-pitch bitmap font of format 0 (bitmap) using font identifier 101, and prints the characters ABCDE and abcde (these are the only characters defined in the font);
- bmp_fixp_fmt20.prn downloads a fixed-pitch bitmap font of format 20 (resolution-specified bitmap) using font identifier 102, and prints as above;
- bmp_prop_fmt0.prn downloads a proportionally-spaced bitmap font of format 0 (bitmap) using font identifier 201, and prints as above;
- bmp_prop_fmt20.prn downloads a proportionally-spaced bitmap font of format 20 (resolution-specified bitmap) using font identifier 202, and printsas above;
- scl_prop_fmt16.prn downloads a scalable proportionally-spaced font of format 16 (TrueType Universal) using font identifier 301, and prints as above.
On my LaserJet Pro 400 Colour MFP M475dn printer, these jobs print as expected; see scan_fontSamples.pdf for a scan of the printed pages.
When I print off a PCL Font List from the printer, after sending these 5 (separate) jobs to the device, the list shows the 5 downloaded soft fonts (see scan_softFontList.pdf), together with their PCL5 font selection sequence skeletons, although it doesn't show the individual font-ID values used when downloading them).
But if I print off the same list after the printer enters its calibration cycle (itself after the printer has entered its sleep mode), the list no longer includes details of any of the downloaded soft fonts, implying that the soft fonts have been deleted (although I've not tested this by attempting to select any of them in another job).