The HP Community is here for you.
12-25-2010 07:10 AM
First time installation of HP Deskjet 3050 model J610a fails when powered on. The power-on button, exclamation mark and both cartridge indikators are blinking fast, and the display shows "ERROR CODE 0XC4EB841A".
What does this error code mean? Is there a hardware/manufactoring error?
04-27-2011 03:54 PM
I had this same issue today. Contacted HP support and we tried a semi-full reset by unplugging the power then reconnecting and holding Cancel and the bottom left button down until the printer reset. The problem I had was that it did not reset. So my printer is getting replaced.
11-06-2011 11:14 AM
bonjour, j'ai cette imprimante depuis plusieurs mois,
hier j'ai changé les 2 cartouches 301, édition OK.
aujourd'hui au lancement de l'imprimante, code erreur oxc4eb841a
quoi faire ?
merci pour votre aide
05-15-2012 08:43 AM
Here is a solution to try to solve this error:
Good luck, Bonne chance !
08-13-2013 07:53 AM
I see that you're having problems with your printer. I have a couple of questions for you.
What printer do you have?
What is the error message displaying on your printer?
08-13-2013 10:33 AM
The printer is: hp deskjet 3050 all-in-one j610.
The error code is as above: 0XC4EB841a
Any help you can give me, I'm ready to re-cycle this printer and buy a new one. I don't want this problem again so I probably won't buy another hp.
08-13-2013 10:38 AM - last edited on 02-23-2017 09:47 PM by OscarFuentes
Thanks for the reply. I would take a look at the document below. An alphanumeric error message means that your printer has a hardware issue. If the steps in the document below are unable to clear the error then I would consider replacement options.
Let me know how it goes.