Ask questions. Help others.
The HP Community is here for you.
Post new question
Note on archived topics.
This topic has been archived. Information and links in this thread may no longer be available or relevant.
If you have a question create a new topic by clicking here, or click on "Post new question" above and select the appropriate board.
Honor Student
Posts: 2
Member Since: ‎06-04-2014
Message 1 of 3 (464 Views)

Officejet 6700 Premium H711n

[ Edited ]

Error or corruptions in firmware code for Officejet 6700 Premium H711n web managment interface under ip protocols.

See example below.  


Detected in Printer?: Enabled

Configured By: HPCD20BW


L@S#0285: 009C020CD20B

L@S#0275: Crossplatform


this error is present throughout the firmware dated.


Firmware in question   2013-06-25 , Version MPM3CN1322DR, 19.3M


While this firmware is working, and did solve problems with paper feeding, just curious, if this is a new standard for firmware for HP Printers.

Even though this machine is 2 years old, will a recoded firmware be made available to customers to correct the error.



New Firmware


2014-07-02 , Version MPMxCN1416AR, 24.29M




0 Kudos
Posts: 1
Member Since: ‎08-14-2014
Message 2 of 3 (394 Views)

Re: Officejet 6700 Premium H711n

My windows 8.1 says no drivers available but the program says film ware  is defective this printer works fine on Windows 7 and apple eprint  but wont work on windows 8.1

Honor Student
Posts: 2
Member Since: ‎06-04-2014
Message 3 of 3 (389 Views)

Re: Officejet 6700 Premium H711n


this is the driver for Windows 8.1 64Bit. Just click the link and download the file.



Install the printer back to your Windows 7 machine, then run the HP Print and Scan Doctor . This will test your printer and make sure all is working, Than go ahead if the test passes, flash the new firmware to the printer.  And it should install without failure into a Windows 8 and 8.1 enviroment.


I have tested the driver and firmware in all 3 enviroments, and I can confirm it is working as intended.


Also make sure that you have latest chipset driver for your USB ports on your motherboard, if you are connected via USB.


as for my configuration, I am connected wirelessly.

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation