The HP Community is here for you.
05-20-2011 10:49 AM
Just purchased the B210a. We have Mac OS X 10.6.7 and use Airport to connect to the internet
The Wireless Network Test report states that "More than one access point/wireless router has been found that matches your wireless network name SSID. If this is not intended, your HP printer may connect to the wrong wireless network. If you change your network name, you will need to configure the SSID on all wireless devices to match your new network SSID"
Also the test stated No flltering FAILED. The IP address is 192.168.1.12.
Any ideas on how to solve so I can set up this printer wirelessly (for our mac and ipad)?
05-20-2011 11:03 AM - edited 05-20-2011 11:05 AM
Actually you need to run the setup wizard on the printer front panel first. And get connected correctly.
As you need to know your ssid name and wep key.
Open System Preferences and select Network.
Please check which one is active. Click on the connection you are connected. That will show you Network name. You need to know the key now ...
you can use Keychain utility to get the key of your network.
And perform wireless setup wizard from the printer front panel.
Run the CD on your mac. your computer will list your printer with kind as bonjour.
Let me know if that helps.
Please mark the post that solves your problem as "Accept as Solution"
Thanks and Regards
09-07-2011 06:21 PM
I have the same problem and I followed the instructions on the setup wizard on the touchsmart keypad and the wireless is found, but it won't connect. I ran the test report, but it doesn't give me an IP address that I can manually input. I am trying to get this to work on my MacBook Pro, not sure if it is a Mac issue or not. Any help would be welcome, I'm a complete newbie.