Print Job Cancels Itself before finishing

[dianebh]

Printer fine yesterday. Today, when making a copy, the printer cancels itself after printing about 1/4 page. Help.

[Chocos]

H, 

thanks for using the HP Forum and reporting the issue. 

There seems to be a similar issue to yours in this forum. Pls try this link and update us again on the progress. 

****

https://h30434.www3.hp.com/t5/Inkjet-Printing/Print-Job-Cancelling/m-p/6043349 :

*****

You might try to reset the printer by following below steps

Reset the printer

Resetting power to the printer forces the printer to reset stored values in the firmware. A power reset can help when the printer is not accepting communication from the computer.

1. Make sure the printer is idle, not making any sounds, before continuing.
2. With the printer turned on, disconnect the power cord from the rear of the printer.
3. Unplug the power cord from the wall outlet.
4. Wait at least 15 seconds.
5. Plug the power cord back into the wall outlet.
6. Reconnect the power cord to the rear of the printer.
7. If the printer does not turn on by itself, press the Power button () to turn it on.
8. Try printing again.
   • If the printer prints, you can stop troubleshooting.
   • Continue troubleshooting if the errors persist.

Thank you.

[dianebh]

Thank you.....it seems to be working now. Appreciate your help very much!