Ask questions. Help others.
The HP Community is here for you.
Post new question
Question
Reply
 
Note on archived topics.
This topic has been archived. Information and links in this thread may no longer be available or relevant.
If you have a question create a new topic by clicking here, or click on "Post new question" above and select the appropriate board.
Honor Student
Posts: 2
Member Since: ‎10-06-2011
Message 1 of 3 (883 Views)

Recover from bad firmware upgrade

LaserJet p4015x

 

Does anyone know how to recover from a bad firmware upgrade?

 

I tried upgrading but now the printer won't boot - gets to 6/6, A/F and hangs. Tried a cold reset but no joy - still hangs at the same place.

 

0 Kudos
Provost
Posts: 41,913
Member Since: ‎01-07-2009
Message 2 of 3 (873 Views)

Re: Recover from bad firmware upgrade

I hope your printer is still in warranty. If no joy after a reset you are pretty much at the end of the troubleshooting process. A shop may be able to replace the eeprom that contains the firmware.

Best regards,
erico
If I was able to help you or guide you on your way to resolve your issue, you can click on the purple Thumbs up + icon to say thanks.

If your problem is solved , please click the Accepted Solution button

I am not an HP Employee, I am a volunteer posting here on my own time
Highlighted
Honor Student
Posts: 2
Member Since: ‎10-06-2011
Message 3 of 3 (869 Views)

Re: Recover from bad firmware upgrade

That's what I feared!

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation