cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
Jerome_James
New member
2 1 0 0
Message 1 of 4
123
Flag Post

USB Version Issue

HP Recommended
HP D110
Microsoft Windows 10 (64-bit)

Installed the software for the D110 and ran a systems check.  Windows 10 64bit which has USB 3.0 generates issues with this printer.  Seeking guidance on a solution.

3 REPLIES 3
ShlomiL
Level 17
Level 17
32,548 32,128 5,521 12,974
Message 2 of 4
Flag Post
HP Recommended

Hi,

Did you complete the installation or got an error while trying to install the softare?

 

If you get an installation error on USB hardware of your PC follow these steps and try again:


Click the Start button and type %temp% into the search bar, then open the shown Temp folder.

Open the latest HP installation folder which begins with 7z (e.g. 7zs1234)
Open the Setup folder.
Locate the usbready.exe file and rename it into usbready.old.exe
Browse back to the main extraction folder (the folders who starts with 7z) and launch the Setup.exe file.

Now follow the installation and check for any difference.

Regards,
Shlomi



Click the Yes button to reply that the response was helpful or to say thanks.
If my post resolve your problem please mark it as an Accepted Solution 🙂
Was this reply helpful? Yes No
Jerome_James
Author
New member
2 1 0 0
Message 3 of 4
Flag Post
HP Recommended

Followed the advice but still cannot scan.   How can I find error logs?

Was this reply helpful? Yes No
ShlomiL
Level 17
Level 17
32,548 32,128 5,521 12,974
Message 4 of 4
Flag Post
HP Recommended

Hi,

What exact error message or behavior do you see while trying to scan?

 

Try HP Scan Extended, may you able to scan using this application instead?

It will be installed under Start > All Apps > HP > HP Scan Extended:

http://ftp.hp.com/pub/scanners/HPScanExt/HPScanExt.msi

 

If it fails too try following HP Print and Scan Doctor by selecting Fix Scanning, be sure to follow any steps on screen:

http://ftp.hp.com/pub/printers/hppsdr/HPPSdr.exe

 

If it fails to resolve te problem may it return any specific error?



Click the Yes button to reply that the response was helpful or to say thanks.
If my post resolve your problem please mark it as an Accepted Solution 🙂
Was this reply helpful? Yes No
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation