The HP Community is here for you.
08-18-2011 11:09 AM
After HP Update notified me of 3 pending updates (including a Critical update to correct a PC to printer communications issue) I launched the update. The first of the 3 updates installed successfully, but the second (Critical) update froze in the middle of DOT4 Scrubber processing. I was able to terminate the second update, allowing the third one to install successfully. Shutting down my Zonealarm firewall had no effect on the problem. I manually downloaded the update (using the link provided) and launched it from my hard drive, but it still won't run to completion. This is apparently a widespread problem, from the comments I've read. Is there a solution? And if so, what is it?
Solved! View Solution.
Re: Why is DOT4 Scrubber hanging when I try to install updates?
11-02-2011 03:02 PM
Well, it's hard to believe after all this time... but today I ran the infamous Critical Update to successful completion! But I will say that it's the first time I've tried it since reinstalling my L7680 printer software with a newer version from HP's web site. To make a long story even longer... a couple of months ago (I think) my scanner functionality "went south". I believe it was the result of problems with some other (unrelated) software that triggered this situation. Anyhow, I tried to reload my printer software from the OEM (HP) CD numerous times and encountered an error each time. At this point I had visions of having to reinstall my entire OS (XP Pro) but as a last resort I checked the HP web site and turned up a newer version of HP Solution Center... which I downloaded and installed. This restored my printer's full functionality, and I haven't been concerned about the infamous Critical Update since... until today, when I received a prompt from HP Update to install it. Reluctantly, I clicked Next and allowed the install to proceed. It appeared that DOT4 Scrubber was going to hang up at the same place again, but since there was still ongoing hard drive activity I allowed it to continue. After a lengthy wait, a notification of successful completion appeared on the screen, followed by a prompt to restart my system. So for now, things are finally back to normal. Hope this will help out the others who had the same problem!
P.S. - With the OEM version of HP Solution Center, I did not experience occasional printer disconnects (which the Critical Update addresses). However, with the new version that's been happening. So hopefully, today's successful install of the update will permanently correct that problem.
08-18-2011 07:48 PM
1) Right click on my computer.
2) Select "manage"
3) Select "Services & apps" (click on + sign to expand and then select services
4) A list of services appears. Scroll down to "print spooler' and select it.
5) Select "start"
I did the above and all my printers showed up again.
08-18-2011 08:03 PM
My problem is not with the print spooler, although once DOT4 Scrubber hangs my installed printers disappear (I can reboot and bring them back). My problem is with not being able to run the install of an update labeled "Critical" to completion. That's the solution I'm asking for. Thanks.
08-28-2011 04:27 PM
I can totally relate to your situation, and can understand the import of your description. I don't know why so many are continuing to dwell on the fact that the upgrade failure causes the print service to be stopped, and methods to 'restore' printer function. A simple reboot takes care of that.
The problem of why the critical update is failing to run to completion remains. And the much more serious problem is the fact that even though complaings of this problem can be seen dating back for some time, I can find no solution offered by HP; not even a suggestion of things to try that might solve the problem. Then, upon visiting the HP support web site, and finding that there are no options to communicate directly with the company, unless you are fortunate enough to have a product that is in warranty, or by paying a support fee, it is exasparating!!
SHAME on HP for deploying a half-baked 'critical' update that is causing problems for so many users, and then completely dropping the ball. This will certainly stick in my mind if and when I should have occasion to shop for another printer product in the future!!!
08-29-2011 09:43 AM
Makes you wonder if the "Critical Update" is sent to deliberately mess up your printer, to make you buy a new one. The next one I buy won't be an HP.
08-30-2011 02:23 AM
I certainly concur with your comments! I recently noticed HP's intention to divest themselves of their PC enterprise... so apparently things are only going to get worse for us (up to now) loyal HP printer customers...
09-06-2011 04:29 PM
Would like to see something from HP on this. In the meantime I am uninstalling HPUpdate.
Note you do not have to restart windows to get your printers back.
Right click on your desktop and choose NEW and TEXT FILE
Open it and paste in
net stop spooler
net start spooler
Close it and save. Once back on the desktop rename the file "Reset Printers.bat" when it asks about changing the extension say ok.
Now when your printers disappear (the print spooler stops) you can double click on this icon to get them back.