Ask questions. Help others.
The HP Community is here for you.
Post new question
Note on archived topics.
This topic has been archived. Information and links in this thread may no longer be available or relevant.
If you have a question create a new topic by clicking here, or click on "Post new question" above and select the appropriate board.
Posts: 1
Member Since: ‎02-08-2013
Message 1 of 2 (281 Views)

bad HP60 cartridge or printer issue?

Installed  new HP60 black cartridge into HP Envy 114 printer.  Only first 25% of my page prints, then the printing fades away.  It does this for each page.


I have the printer connected with cable to my laptop, I unplugged the printer and restarted, took out the cartridge and reinstalled but still have the same issue.


Any suggestions?


0 Kudos
Posts: 19,136
Member Since: ‎01-03-2011
Message 2 of 2 (268 Views)

Re: bad HP60 cartridge or printer issue?

[ Edited ]


First try cleaning the cartridges by following the steps below and check if that may help:

  1. On the product control panel, touch Setup ( ), and then touch Tools . The Tools menu displays.
  2. On the Tools menu, touch Clean Cartridges . The product cleans the cartridges.
  3. Try the print job again.

If the same problem persists, try following the troubleshooting steps listed below and check if that may help:




Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution Smiley Happy
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation