-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Archived Topics
- Printers Archive
- cant connect my HP Envy 5544

Create an account on the HP Community to personalize your profile and ask a question

05-05-2017 04:55 PM
Hi @johnconlan,
Thank you for showing your interest in HP Support Forums. It is a great place to find the help you need, from other users, HP experts, and other support personnel. For you to have the best experience on the HP forum, you could also visit our HP Forums Guide for the First Time Here? Learn How to Post and More.
As I understand you are getting a "0x" error message while connecting your HP Envy 5544 printer to the internet. Don't worry as I have a few steps to help you get through this concern,
To provide you with an accurate solution, I'll need a few more details:
How is the printer connected? USB/Wireless
Do you get this error message on the printer screen or on the computer screen?
Have you tried any troubleshooting steps before posting this on HP Forums?
Let's start off by performing a Hard reset on the printer and make sure that the printer is connected directly to the wall outlet and not to the surge protector.
Hard reset on the printer, router, computer and other devices on the same network.
The following steps temporarily disconnect network and Internet connections and require restarting your computer. Complete any tasks or downloads in progress before continuing.
1. Press the Power button on the printer to turn it off.
2. Disconnect the power cord from the rear of the printer.
3. Disconnect the power cord from the wireless router.
4. Turn off the computer.
5. Wait for 30 seconds.
6. Reconnect the power cord to the wireless router.
7. Wait for 30 seconds, or until the router is fully on and ready
8. Turn the computer back on.
9. Wait for the computer to reload
10. Reconnect the power cord to the rear of the printer.
11. Turn the printer back on.
Let's try these steps here:
1.) In Windows, search for and open Programs and features
2.) Select your HP Printer
3.) Select Uninstall
4.) In Windows, search for and open Devices and printers
5.) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose 'Delete' or 'Remove Device'
6.) Open up the run command with the "Windows key + R" key combo.
7.) Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe” and “/s”)
8.) Click on the "Drivers" tab
9.) Look for HP Printer driver. If you see it Click on it and click Remove at the bottom
10.) Select Ok
11.) Select Apply and Ok on the Print Server Properties windows
12.) Close Devices and Printers
13 ). Restart the PC
14 ). Now click on this link: and download and install the full feature software for this printer.
15 ). In the connection type window, select “Wireless” and follow the on-screen instructions to complete the installation.
For more details, please follow this link: Wireless Printer Setup
Please respond to this post with the result of your troubleshooting. I look forward to hearing from you.
If you wish to help others looking for the same solution as you've found, mark the post as Accepted Solution.
If you wish to show appreciation for my effort, please click the Thumbs up icon at the bottom of my comment.
And I Hope you have a good day, Ahead.
Regards,
Jeet_Singh
I am an HP Employee
05-14-2017 11:27 AM
When I do step 9:
9.) Look for HP Printer driver. If you see it Click on it and click Remove at the bottom
I get the following error message:-
Unable ti remove HPEnvy 5540series, x86, Type 3 - user mode driver. the specified printerdriveris currently in use.
Can you help?
John
05-14-2017 03:43 PM
Hi @johnconlan,
Thank you for replying,
I appreciate your time and efforts,
I see from the post that you are stuck while installing the printer drivers, let's try to turn off the computer and the printer and make sure that the printer is connected via USB or wireless. Once restarted, please perform the steps suggested in the previous post and check if that helps.
I hope this helps. Let me know how it goes for further assistance.
Regards,
Jeet_Singh
I am an HP Employee
05-15-2017 10:53 AM
Hi @johnconlan,
Thank you for replying,
I appreciate your time and efforts,
I understand you have tried the steps suggested and still stuck on the same error, I would personally suggest you contact our HP phone support so that they can remotely take control of your PC and help you check the settings. If your product is out of warranty please choose paid options to get the tech support number.
Please use the following link to create yourself a case number, then call and it may help speed up the call process:
Step 1. Open link: www.hp.com/contacthp/
Step 2. Enter Product number or select to auto detect
Step 3. Scroll down to "Still need help? Complete the form to select your contact options"
Step 4. Scroll down and click: HP contact options - click on Get phone numberCase number and phone number appear.
They will be happy to assist you immediately.
Keep me posted for any other assistance,
Regards,
Jeet_Singh
I am an HP Employee
