The HP Community is here for you.
11-25-2010 08:04 AM
I couldn't set up the wireless connection for my printer HP3050 , I m using windows XP with BT home hub v1.5
I've printed out the wireless network test report
it says all the tests: PASS
signal quality: excellent
in the 2nd part it gives the IP address as well.
conf source: dhcp
comm mode infrastructure
authentication type: open system
In the windows firewall settings,just in case I included printer sharing as an exception as well.
whether blue light's on or flashing didn't change the result, I still can't see my printer on the network, when i try to connect it, keeps saying "unable to find the printer".
Could you please help us on this issue?
Thanks in advance.
11-25-2010 11:24 PM
To be able to set up wireless printer configuration, there are three basic items that you need to have. They are a high-speed broadband Internet connection (with modem), a high speed wireless router and wireless network adaptors. These three items will be used in setting up the wireless printer. Assuming that there is already an existing network in the home or office space, then all that is needed to do to make the printer available in the network through the operating system’s networking wizard. If not, then the network must first be established, only then the printer will be made available through that network.
12-02-2010 04:15 PM
I had the same problem connecting my 3050 to XP SP3. The printer sees the router and I can access the printer through a browser using the IP address listed by the printer. The only way I could connect was to create an IP port for that IP address. The only problem was that on restarting the system the printer had been allocated a different IP address and I had to create another IP port. Not ideal, I don't want to have to create a new IP port every time the router issues a new IP address to the printer
Thanks in advance
12-09-2010 11:20 AM
Using the web browser page to access the printer settings, you can manually assign a static IP address, along with your subnet mask, default gateway, and DNS server address. I had to do that with both XP and Win7 using Zone Alarm Security Suite in order to connect consistently.
08-21-2011 02:25 PM
My Lap top HP G72 says I hav configured my printer successfully but when I click on print to print a document displayed on the lap top screen.I get the message that it cannot recognise my IP address. Ihave dlink router configured to my HP 760 Desk top What I am doing wrong or not doing. If I connect laptop to Printer by usb cable it prints of ok.
PLEASE HELP ME
12-09-2012 09:01 PM - edited 12-09-2012 09:03 PM
HEY IM JUST ANOTHER USER BUT WHAT IM NOTICING IS THAT WE HAVE TO DO TO SOMETHING SPECIAL AND GET IP ADDRESS WE CANTJUST USE OUR WIRELESS LAPTOPS TO PRINT WITH WHICH REALLY SUCKS
01-14-2013 11:32 AM
ok, i have a 3050 j610 printer, a linksys e900 router and an hp pavilion running vista. everything i do doesnt work. It will connect with a usb cable but not wireless. Ive spent over 12hrs on this setup, what am i doing wrong?