• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
Guidelines
We have new content about printers, Click here to check it out!
Repairatrooper
Level 15
‎10-20-2023 05:58 AM
Views : 5,848
67% helpful (2/3)

This demo shows the installation on a Windows 11 64bit system, but the steps are the same for all installations.

First download the driver by going to this website https://support.hp.com/ca-en/help/smartupd

You can download V3 or V4 drivers. V3 are traditional drivers and would be used with older operating systems such Windows 7. Newer operating systems typically work better with V4 drivers.

Repairatrooper_0-1697662695769.png

 

 

Once downloaded double click on the file to start the unpacking process. You will see the window below open. The file is set to automatically unpack to a folder it creates on the main computer drive. You can change if you want a different save location.

Repairatrooper_1-1697662695774.png

 

When finished you will get notification. Click OK and the installation will proceed.

Repairatrooper_2-1697662695776.png

 

A black window will open asking you to select the installation mode. Press T on your keyboard to select TCP/IP Port.

Repairatrooper_3-1697662695777.png

 

You will then be prompted to enter a port name. You can press enter to use the default or enter a name of your own and press enter.  I called mine FO2

Repairatrooper_4-1697662695778.png

 

Next prompt is for the IP address of the printer. Enter the network address of the printer and press enter

Repairatrooper_5-1697662695780.png

 

Next prompt is for a queue name, this is what the printer will be called in Windows so I suggest a name that makes it clear which printer this is. Type the name and press enter.

Repairatrooper_6-1697662695782.png

 

The next prompt is for a share name and if you leave this blank the printer will not be shared. Except in rare occasions there is no good reason to share a network printer so simply press enter and skip the share prompt.

You then see a number of steps appear on the screen as the installation is completed using the details you applied above. Once finished, you will see a confirmation that the printer is installed, you can either close the window or wait for it to close itself.  If the installation fails you should confirm all the information and try the install again.

 

If you then go to control panel>devices and printers you will see your new printer with the name you applied. If you look at printer properties>ports you will see the port that the printer is installed on.

Repairatrooper_7-1697662695795.png

 

Since I created this document HP has changed the installation procedure for Smart Universal Printer Driver and there is no longer the command line installation. As such, unless you are installing the original Smart UPD driver, this document is irrelevant.

 

💡If you have any questions regarding this or any other topic, please click here to create a new post. 

0 Kudos
Was this article helpful? Yes No
Comments
‎12-07-2023 09:54 AM

Thank you for these commands which I have followed.

Unfortunately at this time I can't see any new printer added despite the fact the prompt told me everything forked fine.
In fact at no time the installation asked me which printer I wanted to install.
So there might be something I missed.

‎12-07-2023 10:00 AM

Hello again,
I did try to install with the V3 and again I had an OK from the prompt. It created the port I named and then I'm left there with no printer installed.

There must be something I must learn.

HP Smart Universal Print Driver Series for Windows is the driver I have tried but the install fades away without doing anything:
SUPD-usb-V3-setup-x64-3.06.2.2503

‎01-02-2024 12:07 AM
I appreciate the provided instructions, which I have followed diligently. Unfortunately, despite receiving a confirmation that everything proceeded smoothly, I am unable to observe any new printer additions at this moment. Curiously, the installation process did not prompt me to specify the printer of choice, leading me to believe that I may have overlooked a crucial step. On another attempt using the V3, the prompt signaled success, creating the designated port. However, I find myself in a situation where no printer has been successfully installed. It seems there is a missing element in my understanding of the process. I experimented with the HP Smart Universal Print Driver Series for Windows, specifically version "SUPD-usb-V3-setup-x64-3.06.2.2503," but the installation failed to progress and seemingly faded away without any tangible outcome.
‎01-08-2024 04:56 AM

Thanks for this.

Warning
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.