You might need to reseat the printhead up to three times.
With the printer turned on, unplug the power cord from the rear of the printer.
Lift the carriage latch, slightly lift the printhead, lower the printhead back into the carriage, wiggle the printhead left and right, and then lower the carriage latch to lock the printhead into place.
Close the cartridge access door.
Reconnect the power cord to the rear of the printer.
Wait for the printer to start, and then look for the error.
If the error message persists, repeat the steps to reseat the printhead up to three times.
If the error no longer displays, you are done.
Hope this helps! Keep me posted.
And, Welcome to the HP Support Community.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping
Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".