cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Know the Benefits of your HP account

    Connect with HP support faster, manage all your devices in one place, view warranty information and more– Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Know the Benefits of your HP account

    Connect with HP support faster, manage all your devices in one place, view warranty information and more– Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
New member
1 0 0 0
Message 1 of 2
43
Flag Post

Although I have aligned my printer, every check prints differently and is not aligned.

HP Recommended

 HP Officejet Pro 8035

1 REPLY 1
Highlighted
HP Support Agent
HP Support Agent
24,124 24,012 1,326 1,409
Message 2 of 2
Flag Post
HP Recommended

@Soilandwater

 

Welcome to the HP support community.

 

Clean the printhead

  1. On the printer control panel, swipe down to open the Dashboard, and then touch the Setup icon .

  2. Swipe up on the display, and then touch Printer Maintenance.

  3. Touch Clean Printhead, and then touch Continue.

  4. Examine the test page.

  5. If the print quality is unacceptable, touch Clean Again to continue the next level of cleaning. If necessary, repeat these steps for the third cleaning cycle.

    NOTE: 

    If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes before you perform all three levels of cleaning again.

  6. If the print quality is acceptable, touch Done.

Align the printhead

  1. On the printer control panel, swipe down to open the Dashboard, and then touch the Setup icon .

  2. Swipe up on the display, and then touch Printer Maintenance.

  3. Touch Align Printhead.

    An alignment page prints.

    Example of an alignment page

  4. Open the scanner lid, place the alignment page on the scanner glass, and then touch Scan. See the engraved guide next to the scanner glass for help loading the alignment page.

    The printer scans the alignment page, and an Alignment Successful message displays on the control panel.

    Placing the alignment page on the scanner glass

  5. Print another Print Quality Diagnostic Page to examine the color blocks in Test Pattern 3 again.

You can refer this HP document for more assistance:- Click here

 

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

 

Sandytechy20
I am an HP Employee

Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation