cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Know the Benefits of your HP account

    Connect with HP support faster, manage all your devices in one place, view warranty information and more– Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Know the Benefits of your HP account

    Connect with HP support faster, manage all your devices in one place, view warranty information and more– Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
New member
1 0 0 0
Message 1 of 2
70
Flag Post

Black ink not printing

HP Recommended
HP6520

My black in cartridge will not print.  I have aligned the printhead, cleaned the printhead, replaced the ink cartridge and done any other diagnostic method I could.  Warranty has expired.  Any suggestions? 

Tags (1)
1 REPLY 1
Highlighted
HP Support Agent
HP Support Agent
24,018 23,908 1,321 1,406
Message 2 of 2
Flag Post
HP Recommended

@Kikaleen

 

Welcome to the HP support community.

 

Check the ink cartridge vents

  1.  
  2. Open the ink cartridge access door.

    Open the cartridge access door

  3. Press the tab on the front of the ink cartridge to release it, and then pull it out of the slot.

    Remove the cartridge from the slot

  4. Examine the vent area on the top of the ink cartridge.

    Vent area on the top of the ink cartridge

  5. If the vent is clogged, use a pin to gently remove excess adhesive from the vent.

    1.  

      Clean the clogged vent with a pin

      Clogged vent
    2. Gently remove excess adhesive from the vent

    3. Unclogged vent

  6. Make sure the orange pull tab is completely removed.

    Orange pull tab on the ink cartridge

  7. Insert the ink cartridge into its slot. Press down until it snaps into place.

  8. Repeat these steps for any other ink cartridges with defects on the report.

  9. After reinserting all the ink cartridges, run your finger along the top of the ink cartridges. If any are protruding, press down firmly until each ink cartridge snaps into place.

  10. Print another Print Quality Diagnostic report.

You can refer this HP document for more assistance:- Click here

 

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

Sandytechy20
I am an HP Employee

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation