cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Know the Benefits of your HP account

    Connect with HP support faster, manage all your devices in one place, view warranty information and more– Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Know the Benefits of your HP account

    Connect with HP support faster, manage all your devices in one place, view warranty information and more– Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Note for common printer problems
Customers receiving the"will damage your computer" message along with others like "unable to access cups/tmp" or "'@%' cannot be opened" need to update their version of the macOS. Please check this article for more information: "HPxxxxx.framework" will damage your computer" message in macOS Catalina or Mojave .
Highlighted
New member
1 0 0 0
Message 1 of 2
50
Flag Post

Blinking Lights on printer

HP Recommended
HP Desk Jet 2655
Microsoft Windows 10 (64-bit)

Ink light and Wireless lights keep blinking and would not stop.  The ink cartridges are new and nothing is wrong with my wireless connection.  Lights keep blinking. Both lights are blinking back and fourth.  

1 REPLY 1
Highlighted
HP Support Agent
HP Support Agent
24,137 24,025 1,327 1,410
Message 2 of 2
Flag Post
HP Recommended

@nagosto80

 

Welcome to the HP support community.

 

Clean the electrical contacts

  1. Turn the printer on.

  2. Open the door to access the cartridges.

  3. Wait until the carriage stops moving before you continue.

  4. Remove the cartridge indicated in the error message from its slot, holding it by its side.

       CAUTION: 

    Do not touch the copper-colored contacts or the ink nozzles. Touching these parts can result in clogs, ink failure, and bad electrical connections.

  5. Remove any protective tape that still might be on the contacts.

       CAUTION: 

    Do not touch or try to remove the copper electrical strip.

    Remove the plastic tape and do not touch the contacts or ink nozzles

  6. Lightly dampen a lint-free cloth with distilled water, and then clean only the copper-colored contacts on the cartridge.

    Cleaning the copper-colored contacts on the cartridge

  7. Lightly dampen a lint-free cloth with distilled water, and then clean the electrical contacts in the carriage, located inside the printer.

    The carriage contacts

  8. Wait 10 minutes for the contacts to dry.

  9. Reinsert the cartridge.

    • Insert the black cartridge into the right slot.

    • Insert the tri-color cartridge into the left slot.

  10. Repeat these steps for the other cartridge, if necessary.

  11. Close the cartridge access door.

  12. If the error persists, repeat the previous steps to clean the cartridge and carriage contacts a second time.

  13. Check for the error message.

You can refer this HP document for more assistance:- Click here

 

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

Sandytechy20
I am an HP Employee

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation