Blue Screen Error B337341F

[gillettorg]

My printer works fine, but after a day or two, I get a blue screen with the error code: B337341F. A power off/on fixes it for a couple days then it repeats. I'd done a factory reset, latest firmware and ran diagnosis tool, nothing resolves it.  I cannot find anything online with that error code, anyone else know what it is and how to resolve?

[Nal_NR]

Hi @gillettorg,

Welcome to the HP Support Community

I understand you are getting an error message B337341F on your HP Printer. Not to worry I will help you to get a resolution to resolve the issue.

Let's perform a power drain: 

• With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.
• Remove USB cable, if present.
• Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.
• Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer.
• Turn on the printer and wait till warm-up period finishes and the printer is idle

Update the printer firmware :

• Click here to download and install the latest printer firmware from your product
• Click here to know different methods of updating the printer firmware.

If the issue persists, then we need to perform a semi-full reset to restore the printer back to its original settings.

The reset instructions are specific for your printer and performing those steps on a different printer may brick the device. 

I've sent you a private message with reset instructions, follow the reset instructions to perform a full reset and re-initialize the printer. 

In order to access your private messages, click the private message icon on the upper right corner of your HP Community profile, next to your profile Name or simply click on this link.

Hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

[gillettorg]

I tried all of these steps, per my original post. No luck. 

[Nal_NR]

Hi @gillettorg ,

We apologize for the inconvenience, but it seems that the issue persists even after attempting the troubleshooting steps mentioned above.

Unfortunately, there are no further actions we can take through this channel. I recommend reaching out to our phone support for further assistance.

This might require one-on-one interaction to fix the issue via remote assistance. 

I've sent you a private message with further instructions. In order to access your private messages, click the private message icon on the upper right corner of your HP Support Community profile, next to your profile Name or simply click on this link.

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution button, that'll help us and others see that we've got the answers!