Cannot print

[WBD2020]

Mac to Envy 7640. Air print. Networks are the same. Downloaded latest driver. New modem but have printed since modem was installed.  Was printing a document but accidentally had too many copies so I hit the X on the printer screen to stop printing.  Could not print after that.

[Kumar0307]

@WBD2020, Welcome to the HP Support Community!

• Check if the printer and the MAC are connected to the same new wireless network.
• This printer supports only 2.4GHz network. So, the MAC should be on the 2.4GHz network.
• If you have a Dual-band router and both 2.4GHz and 5GHz networks share the same name/SSID, the printer will not be able to connect to the network. In this case, contact your Internet service provider to assign different names to both the networks.
• Also, check with your Internet service provider if your router is able to forward 'Bonjour packets'.
• The wireless status menu on your Mac should also give us quite a lot of information that would help us identify the issue. You can press and hold the option key on your keyboard and click the WiFi icon to get detailed information.

Restart the wireless router, the printer, and the MAC

Perform a ping test to check the connectivity

1. Obtain the IP address of the printer by clicking on the Wireless icon on the printer
2. On the MAC Go to Spotlight > search for Network utility > select Ping tab > enter the IP address of the printer in the box
3. Check the second box that says Send only > 10 pings
4. Click on ping > Check the results at the end if any packets are lost
5. Note: There should be 0% packet loss, share the results in your next post.

Update the printer firmware

Click here to download and install the latest firmware from your MAC.

Click here to know different methods of updating printer firmware.

Also, check for any software updates on MAC

Click the Apple icon > About This Mac > Software Update and install any available update.

Try printing.

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day!