Default error when I want to print

[Bekkie2]

Hp laser 107a

[Max3Aj]

Hello @Bekkie2, and welcome to the HP Support Community!

Thanks for posting your question. I'm here to help you get things back on track.

The "Default error" when printing from your HP Laser 107a usually indicates a driver, connection, or printer status issue. Let's walk through the steps to resolve it:

Check Printer Status

• Ensure the printer is powered on and connected via USB (HP Laser 107a is a USB-only printer).
• Look for any blinking lights on the control panel:
  • If the Attention light is blinking, it may indicate a paper jam, open door, or toner issue. Refer to this guide: HP Laser 107a - Blinking Lights Troubleshooting.

Set HP Laser 107a as Default Printer

• On your Windows PC:
  • Go to Control Panel > Devices and Printers.
  • Right-click on HP Laser 107a and select "Set as default printer".
  • If there are duplicate entries, remove the ones not in use.

Reinstall or Update Drivers

• Download the latest full software and drivers from HP:
  • HP Laser 107a Drivers & Software.
• Run the installer and follow on-screen instructions to reinstall the printer.

Reset the Printer

• Turn off the printer.
• Unplug the power cord from both the printer and wall outlet.
• Wait 60 seconds, then plug it back in and turn it on.
• Try printing again.

Check for Paper or Toner Issues

• Open the top cover and ensure the toner cartridge is properly seated.
• Load paper correctly into the input tray. Refer to this setup guide: HP Laser 107a Setup | HP® Support

I hope the information shared has been useful and resolves your concern.

Wishing you a smooth and hassle-free experience ahead!

If this solution helped, please click “Accepted Solution” so others can benefit too. Don’t forget to hit the “Yes” button if you found this helpful!

Warm regards,

Max3Aj

HP Support