cancel
Showing results for 
Search instead for 
Did you mean: 
New member
1 0 0 0
Message 1 of 2
54
Flag Post

Druckerfehler / Printer failure

HP Recommended
HP Officejet Pro 8610

In the screen, the are an error with, problem with the printer or inkjet system. Turn the printer off and on, if there are still the problem, contact the hp support. 

 

I'm Bildschirm steht Problem mit dem Drucker oder dem Tintensystem. Drucker aus und wieder anschalten. Besteht das Problem weiterhin, Kontakt mit HP aufnehmen.

1 REPLY 1
HP Support Agent
HP Support Agent
24,468 24,354 1,352 1,435
Message 2 of 2
Flag Post
HP Recommended

@Mimoun

 

Welcome to the HP support community.

 

Check for obstructions in the carriage path

  1. With the printer on, disconnect the power cord from the rear of the printer.

  2. Open the door to access the carriage inside of the printer.

  3. Look in the carriage path for debris such as crumpled paper or dislodged labels, and then remove any that you find.

    Obstruction inside the printer

  4. Use your hand to move the carriage to each side, making sure it moves freely. If the carriage is stalled or docked to one side of the printer and you cannot move it, continue with these steps.

    Moving the carriage from side to side

  5. Close the carriage access door.

  6. Reconnect the power cord to the rear of the printer, and then turn the printer on.

You can refer this HP document form more assistance:- Click here

 

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

 

Sandytechy20
I am an HP Employee

Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation