cancel
Showing results for 
Search instead for 
Did you mean: 
Common problems for INSTANT INK, HP+ PLANS: INK AND TONER
We would like to share some of the most frequently asked questions about Instant Ink. Check out this link: HP INSTANT INK, HP+ PLANS: INK AND TONER. .
Nick1306
New member
1 0 0 0
Message 1 of 2
56
Flag Post

Duplex Printing

HP Recommended
LG Gram
Microsoft Windows 10 (64-bit)

My printer has suddenly stopped flipping on long edge when duplex printing. It prints the same regardless of what I ask it to do, long or short edge.  I have printed from 3 separate laptops & it does the same thing. One of the laptops will not update because of space issues so all 3 are not running the same updates (to the best of my knowledge).

I have checked for software & firmware updates in the printer settings.

 

Any help will be greatly received, thank you.

1 REPLY 1
TEJ1602
HP Support Agent
HP Support Agent
18,719 18,696 1,533 1,509
Message 2 of 2
Flag Post
HP Recommended

@Nick1306, Welcome to HP Support Community!

 

Follow the steps below to isolate and resolve the issue-

 

Use HP Print and Scan Doctor

Download HP Print and Scan Doctor and run the program. It will automatically diagnose and fix any printing/scanning issues. 

For more information, go to https://support.hp.com/us-en/topic/printscandoctor

 

Check the printer driver settings. Refer to the document for help- HP Printers - Print Driver Settings Guide (Windows)

 

If the issue persists, I recommend you delete the driver and root level and retry, follow the steps below: 

  

1) In Windows, search for and open Programs and features 

2) Select your HP Printer 

3) Select Uninstall 

4) In Windows, search for and open Devices and printers 

5) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose ‘Delete’ or ‘Remove Device’ 

6) Open up the run command with the “Windows key + R” key combo. 

7) Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe”

8). Click on the “Drivers” tab 

9) Look for HP Printer driver. If you see it Click on it and click Remove at the bottom 

10) Select Ok 

11) Select Apply and Ok on the Print Server Properties windows 

12) Close Devices and Printers.

 

Use this link to download and install the new driver. Configure the printer and try printing.

 

If you still have issues, try the Windows built-in drivers. Follow the steps below:

 

•   Uninstall the printer drivers. Go to Control Panel - Devices and Printers - Click on "Add printer" and follow the on-screen instructions.

•    When the page prompts for the drivers, select "Windows update". The driver list will be updated.

•    Click HP, Hewlett Packard, or Hewlett-Packard in the Manufacturer pane, and then click the name of your printer in the Printers pane.

 

Refer to this document HP Printers - Installing and Using the Windows Built-in Print Driver for help

 

Also, use the document How to Print on Both Sides of the Paper (Windows) (Duplexing) for detailed instructions on how to print two-sided.

 

Hope this helps! Keep me posted. 

 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

TEJ1602
I am an HP Employee

Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation