Exclamation point blinking and printer not printing

[Samantha993]

Exclamation point blinking and printer not printing HP Laser jet M234

[A_Gayathri]

Hi @Samantha993,

Welcome to The HP Support Community.  

Thank you for posting your query, I will be glad to help you.

I understand the exclamation point is blinking on your HP LaserJet MFP M234sdwe printer and it's not printing, it usually indicates a problem that needs attention. Here are some troubleshooting steps you can try:

1. Check for Paper Jams

• Open the printer and check for any paper jams or debris inside the paper path.
• Remove any stuck paper carefully, and ensure there is no obstruction in the paper tray or around the rollers.

2. Check Printer Status and Error Messages

• On the printer’s display panel, check for any additional error messages or prompts that may explain the issue. If there’s a specific error code or message, look it up in the printer’s manual or online for more details.

3. Check Ink/Toner Levels

• If the toner is low or empty, the printer might stop printing. Replace the toner if needed.

4. Check Printer Connections

• Make sure the printer is properly connected to the computer or network.
• If using Wi-Fi, ensure the printer is connected to the network, and the signal is stable.
• If using USB, check the cable for any issues.

5. Restart the Printer

• Turn off the printer, wait 30 seconds, and then turn it back on.
• This can help resolve temporary errors and reset the printer’s status.

6. Check the Print Queue

• On your computer, check the print queue to see if any print jobs are stuck.
• Cancel any stuck print jobs and try printing again.

7. Reset the Printer to Default Settings

• If none of the above steps work, you can try resetting the printer to its default settings. You can usually do this through the printer’s settings menu or by following the instructions in the printer's manual.

I hope this helps. 

Take care and have a good day.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!