HP Color LaserJet MFP M283fdw - no display

[Troygo420]

HP Color LaserJet MFP M283fdw - No display.  I've tried unplugging, replugging, and the door test (opening and closing 4x) which did product a test doc.  Display still blank.  Please help.

[Raj_05]

Hi @Troygo420,

Welcome to HP Support Community.

Thank you for posting your query, I will be glad to help you.

It sounds like your HP Color LaserJet MFP M283fdw is experiencing display issues despite your attempts at troubleshooting. Here are a few more steps you can try.

• Reset the printer: Sometimes a reset can resolve minor display issues. To reset the printer, turn it off, disconnect the power cord from the rear of the printer, and then wait for about 60 seconds. After that, plug the power cord back in and turn on the printer.
• Check for firmware updates: Ensure your printer's firmware is up to date. Sometimes, software glitches can cause display problems, and updating the firmware can fix them. You can usually check for updates through the printer's control panel menu or via HP's website.
• Inspect for physical damage: Carefully examine the display area for any signs of physical damage, such as cracks or scratches. 

By following these steps, you should be able to diagnose and hopefully resolve the display issue with your HP Color LaserJet MFP M283fdw.

I hope this helps.

Take care and have a good day.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

Alden4

HP Support