cancel
Showing results for 
Search instead for 
Did you mean: 
New member
1 0 0 0
Message 1 of 2
68
Flag Post

HP Color Laserjet Pro MFP M281fdw Service error 79

HP Recommended
HP Color Laser Jet Pro MFP M281fdw
Microsoft Windows 10 (32-bit)

HP Color Laserjet Pro MFP M281fdw Service error 79.  Tried everything. Still stopping and restarting

1 REPLY 1
Level 3
26 25 4 6
Message 2 of 2
Flag Post
HP Recommended

This soluton was povided to me by HP -- it has worked for me and several other folks. I do not recommend downgrading the firmware as several other posts have mentioned -- I think that is unnecessary. Good luck...

 

Below are the steps that you need to follow in the order as mentioned ...

 

Disconnect the printer from the NETWORK
--If on wired network : Unplug the Ethernet cable from back of the printer.
--If on wireless network : Power of the Wireless router. Turn off the printer.

 

Wait for 30 seconds. Turn on the printer.

 

If the printer is in READY state, on the printer front panel, go to Setup -> Network Setup -> Network Services -> IPv6 -> Off. Turn off the printer. Wait for 30 seconds and then turn on.

 

Try printing , it should work.

Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation