cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Know the Benefits of your HP account

    Connect with HP support faster, manage all your devices in one place, view warranty information and more– Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Know the Benefits of your HP account

    Connect with HP support faster, manage all your devices in one place, view warranty information and more– Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
New member
1 0 0 0
Message 1 of 2
61
Flag Post

HP Envy 4520 Printing Partial Lins

HP Recommended
HP Eny 4520
Microsoft Windows 10 (64-bit)

Hello, I replaced the ink cartridges in my HP Envy 4520 today and now it is print partial lines. I've gone through the alignment process multiple times, I've reset the printer, I'm using new and genuine HP cartridges and cleaned the cartridges both first and second level cleanings but the issues continue. Please help with next steps I can take to resolve this issue. Thank you.

1 REPLY 1
Highlighted
HP Support Agent
HP Support Agent
23,999 23,889 1,319 1,404
Message 2 of 2
Flag Post
HP Recommended

@feralboy12

 

Welcome to the HP support community.

Manually clean the area around the ink nozzles

  1. Gather the following materials:

    • Dry foam-rubber swabs, lint-free cloth, or any soft material that does not come apart or leave fibers (coffee filters work well)

    • Distilled, filtered, or bottled water (tap water might contain contaminants that can damage the ink cartridges)

         CAUTION: 

      Do not use platen cleaners or alcohol to clean the ink cartridge contacts. These can damage the ink cartridge or the printer.

  2. Turn on the printer, if it is not already on.

  3. Gently grasp the handles on either side of the printer, then raise the ink cartridge access door until it locks into place.

    The carriage moves to the center of the printer.

    Image: Opening the ink cartridge access door.

  4. Wait until the carriage is idle and silent before you continue.

  5. Disconnect the power cord from the rear of the printer.

  6. Disconnect the USB cable, if it is connected.

  7. To release the ink cartridge, lift the lid on the ink cartridge slot, then gently push the lid back until it stops.

  8. Pull up on the ink cartridge to remove it from the slot.

       CAUTION: 

    Do not remove both ink cartridges at the same time. Remove and then clean each ink cartridge one at a time. Do not leave an ink cartridge outside the printer for more than 30 minutes.

    1. Lift the lid

    2. Gently push the lid back

    3. Pull up on the ink cartridge

  9. Hold the ink cartridge by its sides.

    Image: Hold the ink cartridge by its sides.

       CAUTION: 

    Do not touch the copper-colored contacts or the ink nozzles. Touching these parts can result in clogs, ink failure, and bad electrical connections.

    Image: Do not touch the contacts or nozzles.

  10. Lightly moisten a foam-rubber swab or lint-free cloth with distilled water, and then squeeze any excess water from it.

  11. Clean the face and edges around the ink nozzle with the swab.

       CAUTION: 

    Do not clean the ink nozzle plate.

    Image: The ink nozzle and ink cartridge contacts.

    1. Nozzle plate - Do not clean

    2. Area surrounding ink nozzle - Do clean

    3. Ink cartridge contacts - Do not clean

  12. Either let the ink cartridge sit for 10 minutes to allow the cleaned area to dry, or use a new swab to dry it.

  13. Hold the ink cartridge by its sides with the nozzles toward the printer, then slide the ink cartridge forward into the slot.

  14. Close the lid on the ink cartridge slot to secure the ink cartridge into place.

    1.  

      Image: Inserting the ink cartridges

      Insert the ink cartridge
    2. Close the lid

    3. The color ink cartridge is on the left, and the black ink cartridge is on the right

  15. Repeat these steps to clean, then reinsert the other ink cartridge.

  16. Close the ink cartridge access door.

  17. Reconnect the power cord to the rear of the printer.

  18. Turn on the printer, if it does not turn on automatically.

  19. Try to print again, and examine the page.

You can refer this HP document for more assistance:- Click here

 

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

Sandytechy20
I am an HP Employee

Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation