HP MF13OFW Printer printing out error page? - URP error Code 753

[harry265]

Hi HP Community!

I hope all is well with you. 

Every time I try to print I get the following error printed out. 

How can I fix this? I am a university student and this printer means much to me. 

URP Error Subsystem: PARSER Error: NotImplemented File Name: urp_urf_processor.c Line Number: 753

[Hawks_Eye]

Hi @harry265 

Welcome to the HP Support Community! 

Thanks for posting your query! We're here to help you get back up and running.

The URP Error Code 753 can occur due to various reasons, including issues with the printer's firmware, network connection, or internal errors. Here are a few steps you can follow to resolve it:

Power Cycle the Printer:

• Turn off your printer.
• Disconnect the power cable from the printer.
• Wait for about 30 seconds to 1 minute.
• Reconnect the power cable and turn on the printer.

Check Network Connections:

• Ensure that your printer is properly connected to your network if using Wi-Fi or Ethernet.
• Consider restarting your router.

Update Firmware:

• Visit the HP Support website and check if there is a firmware update available for your printer model (HP LaserJet Pro MFP M130fw).
• Download and install any available firmware updates.

Reset Network Settings:

• From the home screen on the printer control panel, swipe left, and then touch Setup.
• Swipe to scroll to the Network Setup menu.
• Scroll to Restore Network Settings and confirm to reset.

Within two hours, return to the Smart App or software to find and add your printer and complete the setup.

If this solution hits the spot, please come back and click "Accepted Solution" to help others find the answer. And if you'd like to say thanks, select "Yes" on the bottom left of the public post, as that would make our day! 

Take care, and have an amazing day!

Regards, 

Hawks_Eye