cancel
Showing results for 
Search instead for 
Did you mean: 
Common problems for INSTANT INK, HP+ PLANS: INK AND TONER
We would like to share some of the most frequently asked questions about Instant Ink. Check out this link: HP INSTANT INK, HP+ PLANS: INK AND TONER. .
mnulty
New member
1 0 0 0
Message 1 of 2
72
Flag Post

HP Officejet Pro 9015 Blue Screen

HP Recommended
HP Officejet Pro 9015
Microsoft Windows 10 (64-bit)

My printer display has become all blue and it displays only the following error code: b82a357e. I have it plugged directly in to the wall and unplugging and re-plugging it does nothing. Please advise.

1 REPLY 1
KrazyToad
HP Support Agent
HP Support Agent
20,340 20,327 1,236 1,261
Message 2 of 2
Flag Post
HP Recommended

@mnulty

 


Welcome to HP Support Community


I would like to help

 

Please try these steps

 

- Turn on the printer.

- Wait until the printer is idle and silent before you continue.

- Disconnect the USB cable from the rear of the printer. If your printer has a network or wireless connection, leave it connected.

- Remove the ink cartridges from the printer and clean the electrical contacts with a lint free cloth

- With the printer turned on, disconnect the power cord from the rear of the printer and from the wall outlet or power strip.

- Wait at least 60 seconds.

- Plug the power cord back into the wall outlet.

NOTE: HP recommends connecting the printer power cord directly to a wall outlet.

- Reconnect the power cord to the rear of the printer.

- Turn on the printer, if it does not automatically turn on.

- The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.

- Wait until the warm-up period finishes and your printer is idle and silent before you proceed.

- Reinsert the ink cartridges, and then close the ink cartridge access door.

- If you receive a prompt to print a calibration page, do so.

 

Also ensure the printer has the latest Firmware https://support.hp.com/in-en/document/c02919168

 

If the issue persists please contact HP Support in your region for service options

 


1) Click on this link - www.hp.com/contacthp/ 
2) Select your product type below.
3) Enter the serial of your device. 
4) Select the country from the drop-down. 
5) Select the chat or get phone number options based on your preferences. 
6) Fill the web-form and proceed further.


Thank you


If the information I've provided was helpful, give us some reinforcement by clicking the "Solution Accepted" on this Post and it will also help other community members with similar issue.

KrazyToad
I Am An HP Employee

Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation