cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Know the Benefits of your HP account

    Connect with HP support faster, manage all your devices in one place, view warranty information and more– Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Know the Benefits of your HP account

    Connect with HP support faster, manage all your devices in one place, view warranty information and more– Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
New member
4 2 0 1
Message 1 of 4
100
Flag Post

Hp 6978 printer tray does not extend. It is too short for 8 1/2” x 11” to lay flat.

HP Recommended
Hp 6978
Microsoft Windows 10 (64-bit)

HP 6978 Printer - After the paper prints it comes out curled up against the pop up stop piece. I cannot print multiple copies without the paper flying over the tray.

3 REPLIES 3
Highlighted
HP Support Agent
HP Support Agent
5,788 5,758 352 388
Message 2 of 4
Flag Post
HP Recommended

Hi @nreilly,

 

I'd like to help!

 

Have you tried to pull out the output tray extension.?

 

 

 

Hope this helps! Keep me posted. 

 

And, Welcome to the HP Support Community. 

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping

Reply
0 Kudos
Highlighted
Author
New member
4 2 0 1
Message 3 of 4
Flag Post
HP Recommended

The tray is pulled out all the way. Still the paper curls up.

 

Reply
0 Kudos
Highlighted
HP Support Agent
HP Support Agent
5,788 5,758 352 388
Message 4 of 4
Flag Post
HP Recommended

Try the below suggestions-

 

Check the paper, and then reload it

Paper feed issues might result from using ripped, dusty, curled, wrinkled, or bent paper. The quality of the paper can also make a difference. Use these guidelines to help avoid the issue.

  • Use only good quality paper that meets printer specifications.

  • Store all paper in a dry, cool place. Paper feed issues occur more often in humid environments.

  • Do not print on paper that is already printed. The dampness of the ink can cause the paper to stick together.

  • Wait for the printer to complete a job or for an Out of paper or Load Paper message to display before you reload the paper.

Make sure the paper you use to print is in good condition, is neatly stacked in the tray, and the paper path and tray are free from obstructions.

  1. Lift up the output tray, and then pull the input tray toward you to open it.

  2. Remove any paper from the input tray.

  3. Remove any severely bent, wrinkled, or torn paper from the stack.

  4. Check for obstructions inside the input tray. Make sure nothing blocks the paper from engaging with the rollers. Even small pieces of paper can cause paper feed issues.

  5. With both hands, hold the stack of paper, and then tap the bottom edge of the stack on a flat surface so that the stack is even on all sides.

  6. Insert the stack of paper into the input tray.

    Loading paper in the input tray

  7. Push the stack of paper toward the rear of the input tray until the paper stops, and then gently slide in the paper width guides until they lightly rest against the edges of the paper.

  8. Push the input tray forward until it snaps into place, and then lower the output tray.

  9. The printer control panel displays the paper size loaded.

    • If the paper size loaded does not match what is displayed, touch Modify, select your paper size and type, and then touch Done.

    • If the paper size is correct, touch OK.

Try to print. If the issue persists, continue to the next step.

Clean the paper tray rollers

Clean the paper tray rollers underneath the printer.

  1. Carefully lift the printer and set it on its side.

  2. While supporting the printer with one hand, pull the paper tray open to expose the paper rollers underneath the printer.

    Rollers underneath the printer

  3. Lightly dampen a lint-free cloth with distilled water, and then squeeze any excess liquid from the cloth.

  4. Press the cloth against the rollers inside the printer, and then rotate the rollers upwards with your fingers. Apply a moderate amount of pressure to remove any dust or dirt buildup.

  5. Allow the rollers to dry completely (approximately 10 minutes).

  6. Close the paper tray, and then set the printer upright.

Clean the paper feed rollers from inside the ink cartridge access area.

Dust, paper fiber, and other debris might accumulate on the paper feed rollers and cause paper jams and paper feed issues. Clean the rollers inside the printer, and then try to print again.

  1. Turn off the printer, and then disconnect the power cord.

       WARNING: 

    Disconnect the power cord before reaching inside the printer to avoid risk of injuries or electric shock.

  2. Open the ink cartridge access door.

    Opening the ink cartridge access door

  3. Lightly dampen a lint-free swab with distilled or filtered water.

  4. Press the swab against the rollers inside the printer, and then rotate the rollers upwards with your fingers. Apply a moderate amount of pressure to remove any dust or dirt buildup.

    Cleaning the rollers in the cartridge access area

  5. Allow the rollers to dry completely (approximately 10 minutes).

  6. Close the ink cartridge access door.

  7. Reconnect the power cord to the rear of the printer, and then turn on the printer.

Try to print. If the error persists, continue to the next step.

Clean the duplexing rollers

Clean the rollers behind the ink access area of the printer.

  1. Turn off the printer, and then disconnect the power cord.

       WARNING: 

    Disconnect the power cord before reaching inside the printer to avoid risk of injuries or electric shock.

  2. Open the ink cartridge access door.

    Opening the ink cartridge access door

  3. Remove the paper path cover.

    Removing the paper path cover

  4. Lightly dampen a clean, lint-free cloth with bottled or distilled water, and then squeeze any excess liquid from the cloth.

  5. Press the cloth against the rollers, and then rotate them upward with your fingers. Apply a moderate amount of pressure to remove any dust or dirt buildup.

    Cleaning the paper path cover rollers

  6. Allow the rollers to dry completely (approximately 10 minutes).

  7. Insert the paper path cover back into the printer.

  8. Close the ink cartridge access door.

  9. Reconnect the power cord to the rear of the printer, and then turn on the printer.

Try to print. If the error persists, continue to the next step.

Reset the printer

Sometimes an error persists even though there is no paper feed issue. Reset the printer, and then try to print.

  1. With the printer turned on, disconnect the power cord from the printer.

  2. Unplug the power cord from the power source.

  3. Wait 60 seconds.

  4. Reconnect the power cord to a wall outlet and to the printer.

    NOTE: 

    HP recommends plugging the printer directly into a wall outlet.

Try to print. If the error persists, continue to the next step.

If the issue persists, I'd suggest you Contact HP in your region regarding the service options for your printer

 

Hope this helps!

 

 

Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation