cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Know the Benefits of your HP account

    Connect with HP support faster, manage all your devices in one place, view warranty information and more– Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Know the Benefits of your HP account

    Connect with HP support faster, manage all your devices in one place, view warranty information and more– Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
New member
1 0 0 0
Message 1 of 2
60
Flag Post

I have a HP officejet Pro 8620, I've changed the ink cartridges and it keeps warning printer failure

HP Recommended
HP officejet Pro 8620
Microsoft Windows 10 (64-bit)

I have changed the ink cartridges to HP cartridges. The printer keeps giving a warning 'printer failure'. I have followed all instructions regarding turning of and on. I've also cleaning the inset where the cartridges go. It just keeps coming back on with this message

1 REPLY 1
Highlighted
HP Support Agent
HP Support Agent
5,774 5,745 347 386
Message 2 of 2
Flag Post
HP Recommended

Hi @DMac5,

 

I'd like to help with the printer failure!

 

I see you have already couple of important steps, pllease try the below suggestions.

 

Step 1: Check for obstructions in the carriage path

Clear obstructions from the carriage area inside the printer.

  1. With the printer on, disconnect the power cord from the rear of the printer.

  2. Open the door to access the carriage inside of the printer.

  3. Look in the carriage path for debris such as crumpled paper or dislodged labels, and then remove any that you find.

    Obstruction inside the printer

  4. Use your hand to move the carriage to each side, making sure it moves freely. If the carriage is stalled or docked to one side of the printer and you cannot move it, continue with these steps.

    Moving the carriage from side to side

  5. Close the carriage access door.

  6. Reconnect the power cord to the rear of the printer, and then turn the printer on.

If the error persists, continue to the next step.

 

Step 2: Reset the printer

Reset the printer to recover from printer failures.

  1. With the printer turned on, disconnect the power cord from the printer.

  2. Unplug the power cord from the power source.

  3. Wait 60 seconds.

  4. Reconnect the power cord to a wall outlet and to the printer.

    NOTE: 

    HP recommends plugging the printer directly into a wall outlet.

If the issue persists, I'd suggest you Contact HP in your region regarding the service options for your printer

 

Hope this helps! Keep me posted. 

 

And, Welcome to the HP Support Community. 

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation