M1319f MFP - Exclamation mark on, ready light on, display blank.

[dadanator]

The printer does not respond to anything. Including making a copy.

[Raj_05]

Hi @dadanator,

Welcome to HP Support Community.

Thank you for posting your query, I will be glad to help you.

It sounds like your HP M1319f MFP (Multifunction Printer) is experiencing some issues. Here are a few steps you can take to troubleshoot.

• Power Cycle: Turn off the printer, unplug it from the power source, wait for a few minutes, then plug it back in and turn it on again. Sometimes, a simple power cycle can resolve many issues.
• Check Connections: Ensure all cables are securely connected to the printer and the power source. Loose connections can sometimes cause problems.
• Reset Printer: Many printers have a reset option. Look for a reset button or check the printer's manual for instructions on how to perform a reset.
• Replace Toner or Ink Cartridge: If your printer uses toner or ink cartridges, check if they are empty or low. Replace them if necessary.
• Clear Paper Jams: Check for any paper jams inside the printer. Even a small piece of paper stuck inside can cause issues.
• Check Display Settings: If the display is blank, there may be an issue with the display itself or its settings. Try adjusting the display settings if possible.
• Update Firmware/Drivers: Check if there are any firmware updates or driver updates available for your printer on the HP website. Updating firmware or drivers can sometimes resolve compatibility issues.

By going through these steps, you should be able to diagnose and hopefully resolve the issue with your HP M1319f MFP.

I hope this helps.

Take care and have a good day.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

Alden4

HP Support