cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Know the Benefits of your HP account

    Connect with HP support faster, manage all your devices in one place, view warranty information and more– Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Know the Benefits of your HP account

    Connect with HP support faster, manage all your devices in one place, view warranty information and more– Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
New member
1 0 0 0
Message 1 of 2
42
Flag Post

New Officejet 6950 prints coloured lines in pictures

HP Recommended
HP Officejet 6950
Microsoft Windows 8.1 (64-bit)

Recently bought an Officejet 6950, tried to print pictures this weekend but there are always pink/blue lines in the pictures.

Bought new cartridges and still the same problem, did the alignment and cleaning of the printhead several times but the 

problem persists. When I try to print a quality page the blue blocks/lines on top arent fully visible, it seems that there is a problem with the blue colour. Is this a problem with the cartridge? Thx!IMG_4706.JPG

1 REPLY 1
Highlighted
HP Support Agent
HP Support Agent
23,954 23,844 1,319 1,403
Message 2 of 2
Flag Post
HP Recommended

@Stevie599

 

Welcome to the HP support community.

 

Make sure the ink cartridges are properly vented and seated correctly

  1. Turn on the printer, if it is not already turned on.

  2. Open the ink cartridge access door.

    The carriage moves to the center of the printer.

    Open the cartridge access door

  3. Wait until the carriage stops moving before you continue.

  4. Press the tab inward on the front of the old ink cartridge to release it, and then pull up on the ink cartridge to remove it from the slot.

    Pushing the ink cartridge inward and then pulling up to remove it

  5. Examine the vent area above the HP logo on the top of the ink cartridge.

    Image: Examine the vent area on the top of the cartridge

  6. If the ink cartridge still has the orange pull-tab attached, pull to remove it.

    Image: Remove the orange pull-tab

  7. If the vent is clogged, use a straight pin to gently remove excess adhesive from the vent.

    1.  

      Clogged vent
    2. With a straight pin, gently remove excess adhesive from the vent

    3. Unclogged vent

  8. Turn the ink cartridge so that the ink cartridge contacts face downward, and then match the label color with the color dot on the carriage.

  9. Slide the ink cartridge into its slot, and then gently press the ink cartridge down until it snaps into place.

    Reinserting the ink cartridge

  10. Repeat these steps to inspect the vents on each of the ink cartridges.

  11. Make sure each ink cartridge is firmly installed in its slot. Run your finger along the top of the ink cartridges to feel for any that are protruding, and if any are, press down firmly until each ink cartridge snaps into place.

  12. Close the ink cartridge access door.

    Closing the ink cartridge access door

You can refer this HP document for more assistance:- Click here

 

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

 

Sandytechy20
I am an HP Employee

Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation