Officejet 7612 Installation issues

[JaberH]

I used my printer for a long time now without any issues. But yesterday I installed Fresh Windows 10 and had to install the Device Drivers and software. 

But now the device is not pairing with my computer. I installed the HP OJ 7610 software and tried installing my printer.

It says successful andI can reach the last window (Do your Part), but after I hit next nothing happens and the software shuts down.

When I try to open HP 7612 software again it prompts me to pair the printer again from first steps. My printer is in Wifi mode, I have tried pairing with LAN wire mode too, but the result is the same.

The printer is added on my Devices and Printers settings and I have checked the correct driver is also installed. 

As the printer is listed on my Devices and Printers, the Windows built in Scan feature can scan documents but the HP software is what is creating problems. And I can access it and use it from my browser using the IP adress.

Please give me a proper solution on what should I do ?

[Kumar0307]

@JaberH, Welcome to the HP Support Community!

• Make sure the printer and the MAC are connected to the same wireless network.
• This printer supports only 2.4GHz network. So, the PC should be on the 2.4GHz network.
• If you have a Dual-band router and both 2.4GHz and 5GHz networks share the same name/SSID, the printer will not be able to connect to the network. In this case, contact your Internet service provider to assign different names to both the networks.

Run HP Print and Scan Doctor to diagnose and fix any driver issue

Click here to download the file. Once downloaded, make sure to run the file to start the installation and click on 'Fix printing'.

If the issue persists, proceed to the next step.

Use the HP Smart app to print and scan from your Win PC

Click here to download and know more about the app.

If you want the full-featured software as before, perform a clean reinstallation of Pre-installed HP drivers

1.  In Windows, search for and open Programs and features 
2.  Select your HP Printer 
3.  Select Uninstall 
4.  In Windows, search for and open Devices and printers 
5.  In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose ‘Delete’ or ‘Remove Device’ 
6.  Open up the run command with the “Windows key + R” key combo. 
7.  Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe” and “/s”) 
8.  Click on the “Drivers” tab 
9.  Look for HP Printer driver. If you see it Click on it and click Remove at the bottom 
10.  Select Ok 
11.  Select Apply and Ok on the Print Server Properties windows 
12.  Close Devices and Printers, restart the computer.

Click here to download the HP Full-featured driver.

Once downloaded, make sure to run the file to start the installation and follow the on-screen instructions.

Try printing.

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day! 

[JaberH]

Tried everything you said. HP dr shows green tick on everything even printed a test page pefectly.

But the problem is still there, when I open the HP OJ 7610 series software, it prompts me to install the printer again!. 

Please check the log file below:

2020/08/26 19:48:09 [2796] {tid: 0x08BC} (M1) DeviceSetup.exe running from C:\Program Files\HP\HP Officejet 7610 series\Bin\DeviceSetup.exe
2020/08/26 19:48:09 [2796] {tid: 0x08BC} (M1) Show ReLaunchPad
2020/08/26 19:48:09 [2796] {tid: 0x08BC} (M1) CReLaunchPadUI::Display, Displaying "ReLaunchPad Options screen"
2020/08/26 19:48:12 [2796] {tid: 0x08BC} (M1) Done Displaying "ReLaunchPad Options screen", returning "AddPrinter"
2020/08/26 19:48:12 [2796] {tid: 0x08BC} (M1) HWSetup.exe is not installed.
2020/08/26 19:48:12 [2796] {tid: 0x08BC} (M1) CDeviceSetupUI::Display, Displaying "DeviceSetup Guest Not Supported screen"
2020/08/26 19:48:14 [2796] {tid: 0x08BC} (M1) Done Displaying "DeviceSetup Guest Not Supported screen", returning "ConnectionTypeLater"
2020/08/26 19:48:14 [2796] {tid: 0x08BC} (M1) User chose wireless install
2020/08/26 19:48:14 [2796] {tid: 0x08BC} (M1) State: CheckForNetworkConnection
2020/08/26 19:48:14 [2796] {tid: 0x08BC} (M1) State: SearchingForDevices
2020/08/26 19:48:14 [2796] {tid: 0x08BC} (M1) CNetSetupUI::Display, Displaying "NetSetup Search for Devices screen"
2020/08/26 19:48:14 [2796] {tid: 0x05F0} (M1) Search for network devices
2020/08/26 19:48:24 [2796] {tid: 0x05F0} (##) WlanOpenHandle(V1) failed
2020/08/26 19:48:24 [2796] {tid: 0x05F0} (WN) Native Wifi is not in control of the adapter
2020/08/26 19:48:24 [2796] {tid: 0x08BC} (M1) Done Displaying "NetSetup Search for Devices screen", returning "SearchError"
2020/08/26 19:48:24 [2796] {tid: 0x08BC} (##) Search failed
2020/08/26 19:48:24 [2796] {tid: 0x08BC} (M1) User selected wireless from Network Connection screen
2020/08/26 19:48:24 [2796] {tid: 0x08BC} (M1) Getting list of already installed devices
2020/08/26 19:48:24 [2796] {tid: 0x08BC} (M1) State: AttemptWirelessSetup
2020/08/26 19:48:24 [2796] {tid: 0x08BC} (M1) State: Initializing
2020/08/26 19:48:24 [2796] {tid: 0x08BC} (M1) State: CheckingDependencies
2020/08/26 19:48:24 [2796] {tid: 0x08BC} (##) Wireless Setup failed the dependency check.
2020/08/26 19:48:24 [2796] {tid: 0x08BC} (M1) Getting list of already installed devices
2020/08/26 19:48:24 [2796] {tid: 0x08BC} (M1) State: PressWirelessButton
2020/08/26 19:48:24 [2796] {tid: 0x08BC} (M1) CNetSetupUI::Display, Displaying "NetSetup Press Wireless Button screen"
2020/08/26 19:48:38 [2796] {tid: 0x08BC} (M1) Done Displaying "NetSetup Press Wireless Button screen", returning "UserProvidedIP"
2020/08/26 19:48:38 [2796] {tid: 0x08BC} (M1) State: SearchByIPAndInstall
2020/08/26 19:48:38 [2796] {tid: 0x08BC} (M1) CNetSetupUI::Display, Displaying "NetSetup Installing Device screen"
2020/08/26 19:48:38 [2796] {tid: 0x06BC} (M1) Search and install network device with network address: 192.168.0.109
2020/08/26 19:48:39 [2796] {tid: 0x06BC} (M1) Found device by IP address successfully.
2020/08/26 19:48:45 [2796] {tid: 0x06BC} (M1) Rediscovered device successfully.
2020/08/26 19:48:45 [2796] {tid: 0x06BC} (M1) Device already installed.
2020/08/26 19:48:45 [2796] {tid: 0x08BC} (M1) Done Displaying "NetSetup Installing Device screen", returning "InstallSuccess"
2020/08/26 19:48:45 [2796] {tid: 0x08BC} (M1) Device was installed successfully
2020/08/26 19:48:45 [2796] {tid: 0x08BC} (M1) State: InstallSuccess
2020/08/26 19:48:45 [2796] {tid: 0x08BC} (M1) CNetSetupUI::Display, Displaying "NetSetup Install Success screen"
2020/08/26 19:49:08 [2796] {tid: 0x08BC} (M1) Done Displaying "NetSetup Install Success screen", returning "UserOK"
2020/08/26 19:49:08 [2796] {tid: 0x08BC} (M1) Launching WOWPrint
2020/08/26 19:49:08 [2796] {tid: 0x08BC} (##) Failed CreateServiceAccess
2020/08/26 19:49:08 [2796] {tid: 0x08BC} (M1) Setting default printer to "".
2020/08/26 19:49:08 [2796] {tid: 0x08BC} (M1) Launching Toolbox Setup Wizard
2020/08/26 19:49:11 [2796] {tid: 0x08BC} (M1) Launching Environmental Impact screen
2020/08/26 19:49:11 [2796] {tid: 0x08BC} (M1) CFinishSetupUI::Display, Displaying "FinishSetup EnvironmentalImpact screen"
2020/08/26 19:49:11 [2796] {tid: 0x08BC} (M1) Done Displaying "FinishSetup EnvironmentalImpact screen", returning "UserOK"
2020/08/26 19:49:11 [2796] {tid: 0x08BC} (##) EPrintSetup::CreateServiceAccess(DMST_Config, "CN8754R00R064N") failed, (HR=0x83E8E8FC)
2020/08/26 19:49:11 [2796] {tid: 0x08BC} (##) EPrintSetup::Failed to get Config Service
2020/08/26 19:49:11 [2796] {tid: 0x08BC} (WN) ePrintSetup returned error: 87.
2020/08/26 19:49:11 [2796] {tid: 0x08BC} (M1) DeviceSetup finished successfully

[Kumar0307]

@JaberH

Did you try using the HP Smart app?

If the printer is connected to the same wireless network as the PC, let us install the printer using its IP address.

1. On the PC, go to Control panel > Devices and printers > Add a printer(at the top) 
2. Under 'Choose a device or printer', click on 'The printer I want isn't listed'.
3. Select 'Add a printer using a TCP/IP address'
4. Find the IP address of the printer by tapping on the wireless/ethernet icon on the printer screen
5. Type in the 'IP address in Hostname or IP address' box, click next
6. Proceed to the next steps by following the on-screen instructions.
7. Try printing in color.

If the issue persists, Install the printer using Windows built-in driver

Refer to this document to know how. Try printing.

Let me know how this goes.