PRO 9025 only printer a 1/5 of picture on 4/x6

[TLTHORNT]

I can print 8.5X11 with no issue but when I change over to 4X6 print paper and set it up the printer will only printer about 1/5 of the picture.  I am setting up at 4X6, Photo Printer-Borderless/with white borders (both), Print Quality Best, and Print in Max DPI. I have tried printing in both Corel PhotoShop and Windows Photos and the same thing happens.  I have also removed the printer/drivers and reinstalled.

Thanks in advance!

[Dragon-Fur]

@TLTHORNT 

Load the small photo paper into Tray 2 according to the instructions in the User Guide

Pages 33-34

Right after loading the paper...

Tell the printer what you are doing...

Check / Adjust / Retain the Paper at the Printer Display Panel

Note:  This option is not applicable to printers that lack a printer display panel and may not be available on all printer models that do include a printer display panel.

Open Printer Tray,

If you have not yet done so, add desired paper type

Wait a couple of seconds…

Close Tray

IF applicable for your printer:

Look for a message on the Printer Control / Display Panel,

Click Modify (wording varies), set the paper size and type, Click OK

NOTE:  If the size of the Paper Size is not in the Drop-down menu, Select Custom (likely the last selection in the list)

And / Or

Embedded Web Server (EWS)

 Note:  This option is not applicable to printers connected via a USB printer cable (no network connection).

If the printer is on the network,

If the EWS feature is supported on your printer,

Use the Embedded Web Server (EWS) to view / configure your printer.

NOTE:  Laser printer options in EWS are very different from those offered in InkJet Printers.

Open your favorite browser > type / enter Printer IP address into URL / Address bar

Tab Settings > Preferences > Tray and Paper Management

If applicable, check the Advanced section (at the bottom of the Tray and Paper Management menu)

Click Apply to save changes

NOTE:  If the size of the Paper Size is not in the Drop-down menu, Select Custom (likely the last selection in the list)

Example

EWS_9025_Preferences_Tray_and_Paper_Management_All_2

Set the Preferences - Windows

Note:  Ignore this section when not relevant – for example, when using Word > Mailings > Envelopes

Check / enable the printer as the “Default Printer”

Settings > Devices > Printers and scanners

UNCHECK (clear box) Let Windows manage my default printer

Select (Left-Click) your printer from the list of printers > Manage > Set as Default

1. Select and adjust settings in each category for the Media (kind of paper), source (tray), and paper size.

Settings > Devices > Printers and scanners

Left-Click on (your) Printer > Manage > Printing Preferences

Next

Tab Printing Shortcuts > Click / Highlight your preferred shortcut > Click Apply > Click OK to exit

NOTE - Make changes to a Shortcut

• Select a shortcut and adjust the settings for paper, source (tray), other settings / Tabs
• Scan Menu for HP Scan >>  If there is a More > section, check / adjust settings in the sub-sections > Click OK to save sub-menu changes
• If supported, save the edited shortcut or use “Save As” or “Create Custom Shortcut” to save as a new / different file name
• Click OK to save the setup

General Example

Printer  Home Page - References and Resources – Learn about your Printer  - Solve Problems

 “Things that are your printer”

NOTE:  Content depends on device type and Operating System

Categories:  Alerts, Access to the Print and Scan Doctor (Windows), Warranty Check, HP Drivers / Software / Firmware Updates, How-to Videos, Bulletins/Notices, Lots of How-to Documents, Troubleshooting, User Guides / Manuals, Product Information (Specifications), more

When the website support page opens, Select (as available) a Category > Topic > Subtopic

HP OfficeJet Pro 9025 All-in-One Printer 

Thank you for participating in the HP Community.

Our Community is comprised of volunteers - people who own and use HP devices.

Click Thumbs Up to say Thank You.

Question Resolved / Answered, Click "Accept as Solution" .