cancel
Showing results for 
Search instead for 
Did you mean: 
Common problems for INSTANT INK, HP+ PLANS: INK AND TONER
We would like to share some of the most frequently asked questions about Instant Ink. Check out this link: HP INSTANT INK, HP+ PLANS: INK AND TONER. .
rockstir
New member
1 0 0 0
Message 1 of 2
50
Flag Post

Paper size wont change in dual tray HP 8600 Pro Printer

HP Recommended
Officejet 8600 Pro
Microsoft Windows 10 (64-bit)

I have a Officejet 8600 Pro printer with two trays. I print 4x6  mailing labels or #10 envelopes from tray 1 & tray 2  for letters for years. This past few weeks I am unable to print the labels even though i change page settings to 4x6. it keeps showing a 8x11 page. i looked for paper stuck on inside i pulled out a sheet that coiled up on left side and thought that was the problem. that didnt solve it. i went into settings and kept changing the settings, even though i change the settings they don't seen to stay applied even after applying. Did anybody else have this problem

 

1 REPLY 1
TEJ1602
HP Support Agent
HP Support Agent
17,788 17,765 1,435 1,411
Message 2 of 2
Flag Post
HP Recommended

@rockstir, Welcome to HP Support Community!

Follow the steps below to isolate and resolve the issue-

 

Use HP Print and Scan Doctor

Download HP Print and Scan Doctor and run the program. It will automatically diagnose and fix any printer connectivity issues. 

For more information, go to https://support.hp.com/us-en/topic/printscandoctor

 

Update the printer firmware

Download available firmware updates from the HP website

With the printer on and connected to the computer, go to HP Customer Support - Software and Driver Downloads, and then identify your printer. Look for and install any available firmware updates. Refer to the document HP Printers - Updating or Upgrading Printer Firmware

 

If the issue persists, I recommend you delete the driver and root level and retry, follow the steps below: 

  

1) In Windows, search for and open Programs and features 

2) Select your HP Printer 

3) Select Uninstall 

4) In Windows, search for and open Devices and printers 

5) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose ‘Delete’ or ‘Remove Device’ 

6) Open up the run command with the “Windows key + R” key combo. 

7) Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe”

8). Click on the “Drivers” tab 

9) Look for the HP Printer driver. If you see it Click on it and click Remove at the bottom 

10) Select Ok 

11) Select Apply and Ok on the Print Server Properties windows 

12) Close Devices and Printers.

 

Use this link to download and install the new driver. Configure the printer.

 

Also, if the printer is wireless configured, add a TCP/IP port.

  1. Print a Network Configuration Report from the Printer Settings or Wireless menu.
  2. Right-click your printer, select Printer Properties, click the Ports tab and then click Add Port.
  3. Select Standard TCP/IP Port, and then click New Port.
  4. Follow the instructions to add a new port using the information listed on the Network Configuration Report.
  5. Try printing.

Hope this helps! Keep me posted. 

 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

TEJ1602
I am an HP Employee

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation