Print Quality default setting

[jim1971]

My HP3760 has the print quality set as 'normal' as default. How do I reset it to 'draft' as default?

[TEJ1602]

@jim1971, Welcome to HP Support Community!

To be able to assist you better, I'd like to know the following-

• Which device are you trying to print from?
• If computer, what is the Operating System installed on it?
• If a mobile device, is it an android or an iOS?

Keep me posted for further assistance.

[TEJ1602]

@jim1971

This is in response to your private message.

 I recommend you delete the driver and root level and retry, follow the steps below: 

1) In Windows, search for and open Programs and features 

2) Select your HP Printer 

3) Select Uninstall 

4) In Windows, search for and open Devices and printers 

5) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose ‘Delete’ or ‘Remove Device’ 

6) Open up the run command with the “Windows key + R” key combo. 

7) Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe”

😎 Click on the “Drivers” tab 

9) Look for HP Printer driver. If you see it Click on it and click Remove at the bottom 

10) Select Ok 

11) Select Apply and Ok on the Print Server Properties windows 

12) Close Devices and Printers.

Use this link to download and install the new driver. Configure the printer and try printing.

If the issue persists, try the Windows built-in drivers. Follow the steps below:

•    Go to Control Panel - Devices and Printers - Click on "Add printer" and follow the on-screen instructions.

•    When the page prompts for the drivers, select "Windows update". The driver list will be updated.

•    Click HP, Hewlett Packard, or Hewlett-Packard in the Manufacturer pane, and then click the name of your printer in the Printers pane.

Refer to this document HP Printers - Installing and Using the Windows Built-in Print Driver for help

Hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!