Print job double printing and E2 error

[Kraleti]

The print page made by android or microsoft shows jumps of lines (double printing) even when selected proper paper size and after print job, the printer shows E2 error blinking.

Any suggestion to resolve or proper serivce authorized center pr 

[sandytechy20]

@Kraleti

Welcome to the HP support community.

I understand that you are getting an E2 error, and I am glad to assist you.

Perform a power reset , Reset the printer to recover from printer errors or failures.

1. Turn on the printer, if it is not already on.
2. Wait until the printer is idle and silent before you continue.
3. With the printer turned on, disconnect the power cord from the rear of the printer.
4. Wait at least 30 seconds.
5. Plug back the power cable straight to a wall outlet and printer without any surge protector.
6. Turn on the printer.

Update the printer firmware to install the latest updates

Here are the steps:- Click here

Change the paper size setting

• Open a document or photo, and then select a paper size in Windows.
• In the program you are trying to print from, click File, and then click Print.
• The Print window opens.
• Open the Properties dialog box.
• Depending on the software program, the button might be Properties, Options, Printer Setup, Printer, or Preferences.
• Click the Paper/Quality tab, and then click Advanced.
• In the Paper Size drop-down menu, select the paper size for the print job.
• Click OK to apply the paper size settings, click OK to finalize all settings, and then click Print.

Refer to this HP document for further assistance:- Click here

Keep me posted.

If this helps, please mark the public post as an accepted solution so that it benefits several others. 

Cheers.